用totem看视频时把画面放大或者全屏的时候，有很严重的锯齿

tonytop · 发表于 2006-6-3 23:36:18

显卡驱动也装好了，是什么原因呢？

matthewlam64 · 发表于 2006-6-3 23:53:14

要設定 ~/.gnome2/totem_config

http://paste.ubuntu.org.cn/357

tonytop · 发表于 2006-6-4 00:23:37

Post by matthewlam64
要設定 ~/.gnome2/totem_config

http://paste.ubuntu.org.cn/357

你好matthewlam64
把你的帖子拷过来直接覆盖，好像稍好点，但还是有锯齿。。。。。

matthewlam64 · 发表于 2006-6-4 00:43:21

那可能是用不了Xv 顯示輸出 ( XVideo ), 只用了 Xshm 顯示輸出了, 能貼個 /etc/X11/xorg.conf 出來嗎 ?

Post by tonytop
你好matthewlam64
把你的帖子拷过来直接覆盖，好像稍好点，但还是有锯齿。。。。。

tonytop · 发表于 2006-6-4 01:04:03

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath    "/usr/share/X11/fonts/misc"
FontPath    "/usr/share/X11/fonts/cyrillic"
FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath    "/usr/share/X11/fonts/Type1"
FontPath    "/usr/share/X11/fonts/100dpi"
FontPath    "/usr/share/X11/fonts/75dpi"
FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "i2c"
Load  "bitmap"
Load  "ddc"
Load  "dri"
Load  "extmod"
Load  "freetype"
Load  "glx"
Load  "int10"
Load  "type1"
Load  "vbe"
EndSection

Section "InputDevice"
Identifier  "Generic Keyboard"
Driver    "kbd"
Option       "CoreKeyboard"
Option       "XkbRules" "xorg"
Option       "XkbModel" "pc104"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Configured Mouse"
Driver    "mouse"
Option       "CorePointer"
Option       "Device" "/dev/input/mice"
Option       "

rotocol" "ExplorerPS/2"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                   # /dev/input/event
                                                   # for USB
Identifier  "stylus"
Driver    "wacom"
Option       "Device" "/dev/wacom"       # Change to
Option       "Type" "stylus"
Option       "ForceDevice" "ISDV4"             # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                   # /dev/input/event
                                                   # for USB
Identifier  "eraser"
Driver    "wacom"
Option       "Device" "/dev/wacom"       # Change to
Option       "Type" "eraser"
Option       "ForceDevice" "ISDV4"             # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                   # /dev/input/event
                                                   # for USB
Identifier  "cursor"
Driver    "wacom"
Option       "Device" "/dev/wacom"       # Change to
Option       "Type" "cursor"
Option       "ForceDevice" "ISDV4"             # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "L1715S"
Option       "DPMS"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option       "VendorName" "ATI Proprietary Driver"
Option       "ModelName" "Generic Autodetecting Monitor"
Option       "DPMS" "true"
EndSection

Section "Device"
Identifier  "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Driver    "ati"
BusID    "

CI:1:0:0"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver    "fglrx"
EndSection

Section "Screen"
Identifier "Default Screen"
Device    "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
Monitor "L1715S"
DefaultDepth    24
SubSection "Display"
Depth    1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth    4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth    8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth    15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth    16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth    24
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device    "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth    24
SubSection "Display"
Viewport 0 0
Depth    24
EndSubSection
EndSection

Section "DRI"
Mode       0666
EndSection

matthewlam64 · 发表于 2006-6-4 15:49:24

試試 cat /etc/log/Xorg.0.log | grep XVideo
看看有沒有 :

(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation

有就應該可以用 XVideo 顯示輸出的, 否則就不行, 要找高人指點了

tonytop · 发表于 2006-6-4 16:20:27

找到了，和你说的一样啊
cat /var/log/Xorg.0.log | grep XVideo
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation

为什么锯齿依然？

matthewlam64 · 发表于 2006-6-4 18:45:47

會不會是你用 totem-gstreamer ? 有沒有裝 tetom-xine ?

tonytop · 发表于 2006-6-4 18:47:32

是totem呀，你看看这个
sudo apt-get install totem-xine
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
totem-xine 已经是最新的版本了。
共升级了 0 个软件包，新安装了 0 个软件包，要卸载 0 个软件包，有 0 个软件未被升级。

matthewlam64 · 发表于 2006-6-4 18:50:19

那要找高人了

Post by tonytop
是totem呀，你看看这个
sudo apt-get install totem-xine
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
totem-xine 已经是最新的版本了。
共升级了 0 个软件包，新安装了 0 个软件包，要卸载 0 个软件包，有 0 个软件未被升级。

		自动登录	找回密码
密码			注册

用totem看视频时把画面放大或者全屏的时候，有很严重的锯齿

这是我的xorg.conf