发个图图炫一下，顺便问几个问题 ^-^（问题已解决）

tpxc

一.打印机问题，我的打印机是HP PSC 1406多功能一体机，俺现在只要求打印功能。
2我完全按照下面提示做了
# Don't forget to add hplip to /etc/rc.conf daemon list and place it before cups is started!.
# You can open the HP Device Manager by entering this command in the console window:
# $ hp-toolbox
# You will need to install 'pyqt' for running hp-toolbox.
# 'pacman -S pyqt' should do this for you.

# If you want to use this driver with sane:
#  echo "hpaio" >> /etc/sane.d/dll.conf

# Usb printers need to change to new layout, pleae reconfigure these devices.
3.运行hp-toolbox.报错
error: Unable to connect to HPLIP I/O. Check and make sure HPLIP is running.
error: Unable to create client object.
注：lsmod已经加载usb的模块

用图形化工具能工具能显示打印机型号，HP xx 1400 (忘了具体的了）
在CentOS4下能用打印机，可是当时忘了用的是哪个驱动了，另外这个hplip驱动貌似很少

请大大们指点我一下

二.xmms问题，查了一下大多是说列表的字体
但我的xmms连命令菜单也是乱码，少了字体文件
三.最想知道的，那种长长的字体文件怎么做出来的（******xxxx*su*****gb2312***。什么的），看了写文章，说的都不够仔细，只有结果没有过程，没有理论~！！

所以大大们帮帮欧吧~！！^-^

threedot

三
用 xfontsel 选择字体,不知道你是不是这个意思?

tpxc

Post by threedot
三
用 xfontsel 选择字体,不知道你是不是这个意思?

哇还第一第知道有这么个软件呢，我的意思是，自动生成好多好多字体~.~

fallen

gnome下面用amarok。。。。真是浪费呢

fluke

gnome下用rythmbox把，和itunes差不多，不过我在kde下运行会崩溃

tpxc

Post by fluke
gnome下用rythmbox把，和itunes差不多，不过我在kde下运行会崩溃

装好运行就崩溃，作孽啊~！！！
(rhythmbox:3733): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.

(rhythmbox:3733): Rhythmbox-WARNING **: couldn't connect to session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)

(rhythmbox:3733): Rhythmbox-WARNING **: Unable to start mDNS browsing: MDNS 服务未运行

** (rhythmbox:3733): WARNING **: Could not connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??

** (rhythmbox:3733): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??

** (rhythmbox:3733): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??
[root@myhost tpxcer]#
(rhythmbox:3750): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.

(rhythmbox:3750): Rhythmbox-WARNING **: couldn't connect to session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)

(rhythmbox:3750): Rhythmbox-WARNING **: Unable to start mDNS browsing: MDNS 服务未运行

** (rhythmbox:3750): WARNING **: Could not connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??

** (rhythmbox:3750): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??

** (rhythmbox:3750): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: ?\xd3\xd0\xc4?\xf6\xce?\xfe\xbb\xf2??

atfa

楼主安装cpus以后在localhost:631去配置吧

loujch

Post by atfa
楼主安装cpus以后在localhost:631去配置吧

cups,然后应该在rc.conf里把cups加入daemons

yuchen

我这里 rhythmbox 运行崩溃倒不必安装 cups 这么费劲，只是在 /etc/rc.conf 里面添加 dbus 这个 daemon 就可以了，不过 epiphany 就没那么好说话了。

fluke

哦，原来如此，呵呵，谢谢