LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1096|回复: 5

请问 16:9 宽屏如何配

[复制链接]
发表于 2006-9-11 01:45:49 | 显示全部楼层 |阅读模式
我用的是 sony T17
是宽屏幕笔记本
分辨率是可以设置到 1280*720
不过重启动以后 无法实际显示整个屏幕.
屏幕4周 有黑色区域. 还必须用鼠标 移动才能看到整个屏幕.

我在配制显示器 那里试了好多次都无法解决. 请问这样的情况改如何解决呢?

谢谢了.
发表于 2006-9-11 02:00:30 | 显示全部楼层
手动修改配置文件吧/etc/X11/xorg.conf
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-11 03:50:25 | 显示全部楼层
The T150 uses a wide-screen LCD with an actual resolution of 1280x768, very similar to the TR2/TR3 series notebooks. Unfortunately, at the moment it is only possible to get 1024x768 graphics working automatically. This is not the fault of Xorg or Linux- the reason is that the video bios does not contain information about that mode. As you might expect, this means there will be dead areas on the left and right of the wide screen. You can “stretch” the screen in the BIOS, though, although the results are less than impressive. There is a utility called “855resolution” which, on many Intel 855 chipset laptops, will enable the user to replace one of the video bios modes with the timings for the 1280x768. It is reported to work on the TR2/TR3 machines, and several non-Sony wide-screen laptops and does work on the T150 but you have to move from the X virtual terminal to a text screen, then BACK to X. When that is done, the “scrambled” display “fixes” itself. To automate the 855resolution, I just tacked on the following script to the bottom of /etc/rc.d/rc.sysinit:

The script contains this:

855resolution 52 1280 768 > /dev/null
855resolution 43 1280 768 > /dev/null

This will replace both the 16bit and 24(32)bit color 800x600 resolutions with the new 1280x768. Then add this to your XF86Config monitor section:

        HorizSync    20 - 90
        VertRefresh  50 - 100
        DisplaySize 230 138
        Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
Note that the widescreen will not come back properly after a hibernate. The screen will be corrupt. Changing to a vt then back to X is not enough to fix it. Instead, you have to run the 855 script again and THEN change from a vt and back to X. Still looking for a way to automate that, but nothing I try works.

Note that when you use the wide display modes, it will corrupt the graphical-based VT consoles (not X). For this reason, you will need to modify /etc/lilo.conf and change “vga=768” to be “vga=normal” and rerun the lilo command. Bootups will be text-only, no pretty graphics, but it allows you to actually use the consoles.

这是在 Linux on Laptops 找到的配制信息。 但是我还是弄 不好. 能够详细点介绍如何 修改 这个 xorg.conf 么? 谢谢了.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-11 04:08:13 | 显示全部楼层
我用 XF86Config 设置 但是不知到如何填写这些内容进去.
里面 并没有 refresh diplaysize 以及 modeline 这些东西的填写啊.

抱歉了. @@
回复 支持 反对

使用道具 举报

发表于 2006-9-11 09:19:08 | 显示全部楼层
我觉得用mdv的时候,可以先试试看mandriva控制中心,而且现在已经用Xorg代替XFconfig了
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-11 13:03:47 | 显示全部楼层
是的, 不过我单单 如果只是修改XORG 的话.
什么都没有改变哦. 还是老样子.
@@
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表