［求助］ATI显卡不能启动3D效果

kwydd

刚装的FC6，能检测到我的显卡型号，但是没有驱动
装了个这个东西
＃rpm -ivh http://rpm.livna.org/livna-release-6.rpm
# yum install kmod-fglrx
#aticonfig --initial
#reboot
画面变清楚了，可是运行
[root@localhost ~]# fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
好像没装上ATI
[root@localhost ~]# glxinfo |grep render
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
3D也没打开
[root@localhost ~]# glxgears
841 frames in 5.0 seconds = 167.374 FPS
1779 frames in 5.0 seconds = 355.800 FPS
2656 frames in 5.1 seconds = 523.294 FPS
2440 frames in 5.6 seconds = 435.977 FPS
840 frames in 5.4 seconds = 154.834 FPS
840 frames in 5.4 seconds = 156.124 FPS
840 frames in 5.4 seconds = 155.365 FPS
840 frames in 5.4 seconds = 154.917 FPS
才100多FPS，齿轮都不转，最小化窗口后，也就1000多，我看网上说成功安装后能到4000多FPS
怎么才能开启3D效果
我的 机子DELL 6400，显卡ATI  mobility  redon  X1300
我在ATI 官方下的 for linux->notebook->8.29.6版的驱动，装不上
那位高手给我指点一下问题在那

suanli

这个，大家怎么都碰到这个问题啊～
这里有个网页可以参考
http://www.phoronix.com/redblog/?p=blog&i=NTU1MA
之后可能碰到普通用户没有DRI权限的问题，google一下搞定

VinX

官方8.29.6驱动是不支持那个3D特效的

yzkzero

我是重新编译内核，去除默认的rendering manger，就可以安装上了。

[skall@SKALL ~]$ glxgears
20332 frames in 5.0 seconds = 4066.400 FPS
51429 frames in 5.0 seconds = 10285.800 FPS
52843 frames in 5.0 seconds = 10568.600 FPS
52559 frames in 5.0 seconds = 10511.800 FPS

[skall@SKALL ~]$ glxgears -info
GL_MAX_VIEWPORT_DIMS=4096/4096
GL_RENDERER   = ATI Mobility Radeon X1400 Generic
GL_VERSION    = 2.0.6065 (8.29.6)
GL_VENDOR     = ATI Technologies Inc.
...

kwydd

Post by yzkzero
我是重新编译内核，去除默认的rendering manger，就可以安装上了。

[skall@SKALL ~]$ glxgears
20332 frames in 5.0 seconds = 4066.400 FPS
51429 frames in 5.0 seconds = 10285.800 FPS
52843 frames in 5.0 seconds = 10568.600 FPS
52559 frames in 5.0 seconds = 10511.800 FPS

[skall@SKALL ~]$ glxgears -info
GL_MAX_VIEWPORT_DIMS=4096/4096
GL_RENDERER   = ATI Mobility Radeon X1400 Generic
GL_VERSION    = 2.0.6065 (8.29.6)
GL_VENDOR     = ATI Technologies Inc.
...

======================================================
我想问一下楼上的，我的机子时dell6400，cpu是酷睿TM（T2300，1.83GH），我的cpu是64位的吗 ，我是该装i386，还是 x86-64呢？

kwydd

还有 ，我以前没编译过内核 ，找了几 本书，按书上说的
[root@localhost /]# cp /boot/config-2.6.18-1.2798.fc6 /usr/src/kernels/2.6.18-1.2798.fc6-i586/
[root@localhost /]# cd /usr/src/kernels/2.6.18-1.2798.fc6-i586/
[root@localhost 2.6.18-1.2798.fc6-i586]# make xconfig
  CHECK   qt
/usr/lib/qt-3.3/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc
  HOSTCXX scripts/kconfig/qconf.o
  HOSTLD  scripts/kconfig/qconf
scripts/kconfig/qconf arch/i386/Kconfig
#
# configuration written to .config
#
#
# configuration written to .config
#
#
# configuration written to .config
#
You have new mail in /var/spool/mail/root
找到那个 rendering manger，去掉这个选项
可是重新编译是出错，是什么 原因 阿
[root@localhost 2.6.18-1.2798.fc6-i586]# make
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf -s arch/i386/Kconfig
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  HOSTCC  scripts/genksyms/genksyms.o
  HOSTCC  scripts/genksyms/lex.o
  HOSTCC  scripts/genksyms/parse.o
  HOSTLD  scripts/genksyms/genksyms
  CC      scripts/mod/empty.o
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/modpost.o
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
make[1]: *** No rule to make target `init/main.o', needed by `init/built-in.o'.  Stop.
make: *** [init] Error 2
怎么 编译内核，请高手指教 阿

lincomet

Post by yzkzero

[skall@SKALL ~]$ glxgears
20332 frames in 5.0 seconds = 4066.400 FPS
51429 frames in 5.0 seconds = 10285.800 FPS
52843 frames in 5.0 seconds = 10568.600 FPS
52559 frames in 5.0 seconds = 10511.800 FPS

唉，硬件真是好啊，我的分数只有你的一个零头而已，唉！

zhangchi100

我用dedora自带的驱动也能在40000 frames的情况下达到8000多，而且我的显卡只是ATI9000，而且用了官方的驱动就不能开桌面特效，真不知道该怎么办？

yzkzero

Post by kwydd
======================================================
我想问一下楼上的，我的机子时dell6400，cpu是酷睿TM（T2300，1.83GH），我的cpu是64位的吗 ，我是该装i386，还是 x86-64呢？

1、T2300是1.66GHz的
2、不是64位
3、所以装i386/i686

Post by kwydd
还有 ，我以前没编译过内核 ，找了几 本书，按书上说的
[root@localhost /]# cp /boot/config-2.6.18-1.2798.fc6 /usr/src/kernels/2.6.18-1.2798.fc6-i586/
[root@localhost /]# cd /usr/src/kernels/2.6.18-1.2798.fc6-i586/
[root@localhost 2.6.18-1.2798.fc6-i586]# make xconfig
CHECK qt
/usr/lib/qt-3.3/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc
HOSTCXX scripts/kconfig/qconf.o
HOSTLD scripts/kconfig/qconf
scripts/kconfig/qconf arch/i386/Kconfig
#
# configuration written to .config
#
#
# configuration written to .config
#
#
# configuration written to .config
#
You have new mail in /var/spool/mail/root
找到那个 rendering manger，去掉这个选项
可是重新编译是出错，是什么 原因 阿
[root@localhost 2.6.18-1.2798.fc6-i586]# make
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf -s arch/i386/Kconfig
CHK include/linux/version.h
CHK include/linux/utsrelease.h
HOSTCC scripts/genksyms/genksyms.o
HOSTCC scripts/genksyms/lex.o
HOSTCC scripts/genksyms/parse.o
HOSTLD scripts/genksyms/genksyms
CC scripts/mod/empty.o
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
make[1]: *** No rule to make target `init/main.o', needed by `init/built-in.o'. Stop.
make: *** [init] Error 2
怎么 编译内核，请高手指教 阿

我的操作方法：
make mrproper && make xconfig && make && make modules_install && make install

还有，我用的是自己下载的2.6.18.1，不是系统带的内核包

mytanjing

rendering manger 在哪一项里，我怎么找不到？