如何关闭3D桌面..............

dyneluce

FC6
[root@localhost ~]# rpm -ivh kernel-2.6.18-1.2798.fc6.i686.rpm

[root@localhost ~]# rpm -ivh kernel-devel-2.6.18-1.2798.fc6.i686.rpm

restart computer  从新内核进入

[root@localhost ~]# ln -sf /usr/src/kernels/$(uname -r)-$(uname -m) /usr/src/linux

= ======================================================================
[root@localhost ~]# yum install qt-devel
安装了qt-3.3.7-0.1.fc6.i386.rpm和qt-devel-3.3.7-0.1.fc6.i386.rpm后

[root@localhost ~]# chmod +x ati-driver-installer-8.32.5-x86.x86_64.run

[root@localhost ~]# ./ati-driver-installer-8.32.5-x86.x86_64.run --buildpkg Fedora/FC6

[root@localhost ~]# rpm -ivh kernel-module-ATI-fglrx-2.6.18-1.2798.fc6-8.29.6-1.fc6.i386.rpm

[root@localhost ~]# rpm -ivh ATI-fglrx-8.29.6-1.fc6.i386.rpm

[root@localhost ~]# rpm -ivh ATI-fglrx-control-panel-8.29.6-1.fc6.i386.rpm

[root@localhost ~]# rpm -ivh ATI-fglrx-devel-8.29.6-1.fc6.i386.rpm

Restart computer

= ====================================================================

[root@localhost ~]# uname -r

2.6.18-1.2798.fc6

[root@localhost ~]# unmae -m

i686

[root@localhost ~]# rpm -qa|grep compiz

compiz-0.0.13-0.32.20060817git.fc6

[root@localhost ~]# rpm -e compiz 2> /dev/null

[root@localhost ~]# rpm -ivh glitz-0.5.6-5.fc6.i386.rpm

[root@localhost ~]# rpm -ivh glitz-glx-0.5.6-5.fc6.i386.rpm

[root@localhost ~]# rpm -ivh libsvg-0.1.4-1.i386.rpm

[root@localhost ~]# rpm -ivh libsvg-cairo-0.1.6-1.i386.rpm

[root@localhost ~]# rpm -ivh xorg-x11-server-Xgl-1.1.99.1-3.i386.rpm

[root@localhost ~]# rpm -ivh xgl-hardware-list-1.0.0-2.noarch.rpm

[root@localhost ~]# rpm -ivh gset-compiz-0.3.3-1.i386.rpm

[root@localhost ~]# rpm -ivh fedora-xgl-settings-0.0.1-2.noarch.rpm

[root@localhost ~]# rpm -ivh compiz-1.0.0-5.i386.rpm

[root@localhost ~]# gnome-xgl-switch --enable-xgl --auto

Do you want to apply the modifications now? (y/n) : y



Attention !!! save you current documents before press any key to this terminal, GDM must be restarted for applying this settings...

= =====================================================================

注意: 如果先安装了显卡驱动，那么这这里按任意键之前要

[root@localhost ~]# vim /etc/X11/xorg.conf

加入

  Section "Extensions"

   Option "Composite" "False"

  EndSection

段。否则看不到图形界面。

就这样安装好了ATI显卡和启动了3D桌面....问题是现在一开机进入就是3D桌面...开启和关闭3D桌面的选项不见了....请问有人知道如何关闭吗...........................