LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 627|回复: 3

help~怎么才能在trubo linux7.0下用usb鼠???

[复制链接]
发表于 2003-4-8 17:10:45 | 显示全部楼层 |阅读模式
在学校机房的
实在搞不定啊!!!
救命~~~
发表于 2003-4-8 21:05:12 | 显示全部楼层
我记得在Turbo中有个设置鼠标的命令。一会我把Turbo安装上试一下。
另请windrose兄来帮助一下吧。
发表于 2003-4-8 21:32:37 | 显示全部楼层
我用7.0的时候还没有usb鼠标,现在在8.0里面是能够自动识别的。试试用turboxcfg设置一下。如果还是不行,看看这些:
You can use USB devices in Linux with 2.4.x kernels, or with a 2.2 kernel that is at least 2.2.18.

                       You will need the following kernel modules
                       usbcore
                       usb-ohci or usb-uhci or uhci
                       hid
                       mousedev
                       Find out which module you need for your USB interface. You choices are usb-ohci, usb-uhci or uhci.
                       Try loading each module with the command"modprobe [module name]".
                       If you get some error messages, then you didn't load the correct module, so try a different one.
                       Now that you have the correct USB interface driver installed, load the modules hid and mousedev.
                       modprobe hid
                       modprobe mousedev
                       Now you may need to add an entry to /dev for the new mouse. If you don't have the file"/dev/mice" then you will need to
                       add the following.
                       Add the device"/dev/mice" with major number 13 and minor number 63.
                       mknod /dev/mice c 13 63
                       Now if you want to use the mouse with GPM, then you will need to run"gpmconfig" and set the mouse device
                       to"/dev/mice" and set the type to"S/2".
                       If you want to use the mouse with X-Windows, then you will need to have the following lines in the mouse section of you
                       XF86Config file.
                       Option"rotocol""ImPS/2"
                       Option"Device""/dev/mice"
                       If you have similar lines in the mouse section, as you should then just change them to match the above lines.
                       You will need to restart X-Windows for the changes to take effect.

                     Now you can use your USB mouse in Linux.
 楼主| 发表于 2003-4-10 12:27:01 | 显示全部楼层
谢谢两为老大
我搞定了,就是用的setup
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表