|
|
终于解决了无线网卡的问题
已经郁闷了几个月了
。。。。。。。。。。。。。。。。。。
1、首先我移植的asus wl167G的无线网卡，它的芯片是ralink rt73
它的驱动源码有两种：一种是官方源码：http://www.ralinktech.com/ralink/Home/Support/Linux.html
另一种是开源rt2x00：http://rt2x00.serialmonkey.com/p ... 9c89bdd9e12cf17f9ba
一开始我移植都没有成功。
现在我知道原因了。
因为官方和rt2x00给的代码都是针对x86 等little endian系统的。
big endian与little endian介绍参考：http://zhidao.baidu.com/question/10925603.html 和http://blog.csdn.net/wqf363/archive/2006/11/28/1418767.aspx
· 纯Big Endian: Sun SPARC, Motorola 68000，Java Virtual Machine
· Bi-Endian, 运行Big Endian模式: MIPS运行IRIX, PA-RISC，大多数Power和PowerPC系统
· Bi-Endian, 运行Little Endian模式: MIPS 运行Ultrix，大多数DEC Alpha, IA-64运行Linux
· Little Endian: Intel x86，AMD64，DEC VAX
而我的系统是powerpc架构的，好像可以配置支持little endian，我暂时还没有查到怎么配置，所以默认情况下是big endian。
所以移植的代码都是不好使的。
我的工作就停滞了。
2、后来我看到华恒公司在ppc平台上移植成功了dlink dwl-g520+A，它一开始告诉我是dlink dwl-g520，害我花了500买了两块dlink dwl-g520，后来才发现里面的芯片是Atheros AR5212，它的源码项目：madwifi，我在pc机上没有安装成功，再说它不知道adhoc模式，所以移植成功了也白搭。
后来再买了两块dlink dwl-g520+A，它的芯片是ralink rt61芯片，我从官方源码：http://www.ralinktech.com/ralink ... x是专门针对big endian的。所以对其进行修改，并移植，再下载到开发板上，竟然好用了！兴奋啊！！！
而rt73里面没有Makefile.RTL865x这个Makefile。所以我想到拿rt61里的Makefile.RTL865x用到rt73里是不是好用！
我修改后的Makefile:
#
CC := /mpc8272/powerpc-gcc/bin/powerpc-linux-gcc
LD := /mpc8272/powerpc-gcc/bin/powerpc-linux-ld
KERNELDIR := /mpc8272/kernel-2.4.26-free
#
#CFLAGS = -Wall -O2 -D__KERNEL__ -DMODULE -D__MIPSEB__ \
-DBIG_ENDIAN -DRALINK_ATE\
-DAGGREGATION_SUPPORT -DWMM_SUPPORT\
-fomit-frame-pointer -fno-common \
-mlong-calls -mno-abicalls -fno-pic -pipe \
-I$(KERNELDIR)/include -I$(KERNELDIR)/drivers/net -include $(KERNELDIR)/include/linux/modversions.h
CFLAGS = -Wall -O2 -D__KERNEL__ -DMODULE -D__MIPSEB__ \
-DBIG_ENDIAN -DRALINK_ATE\
-DAGGREGATION_SUPPORT -DWMM_SUPPORT\
-fomit-frame-pointer -fno-common \
-m -m -fno-pic -pipe \
-I$(KERNELDIR)/include -I$(KERNELDIR)/drivers/net -include $(KERNELDIR)/include/linux/modversions.h
# -DDBG -DSINGLE_ADHOC_LINKUP
MOD_TARGET = rt73.o
CONF_FILE = rt73sta.dat
OBJ = rt73.o
#all: $(MOD_TARGET)
all: $(OBJ)
RT73_OBJ := rtmp_main.o mlme.o connect.o rtusb_bulk.o rtusb_io.o sync.o assoc.o auth.o auth_rsp.o rtusb_data.o rtmp_init.o sanity.o rtmp_wep.o rtmp_info.o rtmp_tkip.o wpa.o md5.o
#ifdef MAT_SUPPORT
ifeq ($(HAS_ETH_CONVERT),y)
RT73_OBJ += cmm_mat.o \
cmm_mat_iparp.o \
cmm_mat_ipv6.o \
cmm_mat_pppoe.o
endif
#endif // MAT_SUPPORT //
#$(MOD_TARGET): $(OBJS)
# $(LD) -r -o $@ $(OBJS)
rt73.o: $(RT73_OBJ)
$(LD) -r $^ -o $@
clean:
rm -f *.o *.bak
romfs:
cp -f $(MOD_TARGET) $(ROMFSDIR)/lib/modules/$(MOD_TARGET)
#cp -f $(CONF_FILE) $(ROMFSDIR)/etc/$(CONF_FILE)
没有修改几个地方。
make时发现rtmp_info.c这个有错误
cc -D__KERNEL__ -I/usr/src/linux-2.4.20-8/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include /usr/src/linux-2.4.20-8/include/linux/modversions.h -DAGGREGATION_SUPPORT -DWMM_SUPPORT -Wall -Wstrict-prototypes -Wno-trigraphs -DNATIVE_WPA_SUPPLICANT_SUPPORT -c -o rtmp_main.o rtmp_main.c
rtmp_main.c: In function `rt61_get_drvinfo':
rtmp_main.c:78: warning: unused variable `pAd'
rtmp_main.c: In function `rt61_get_regs':
rtmp_main.c:103: warning: unused variable `pAd'
rtmp_main.c:104: warning: unused variable `counter'
rtmp_main.c: In function `rt61_ethtool_get_link':
rtmp_main.c:120: warning: unused variable `pAd'
rtmp_main.c: In function `rt61_get_eeprom':
rtmp_main.c:145: warning: unused variable `pAd'
rtmp_main.c:146: warning: unused variable `counter'
rtmp_main.c: At top level:
rtmp_main.c:162: variable `rt61_ethtool_ops' has initializer but incomplete typertmp_main.c:166: unknown field `get_drvinfo' specified in initializer
rtmp_main.c:166: warning: excess elements in struct initializer
rtmp_main.c:166: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:167: unknown field `get_regs_len' specified in initializer
rtmp_main.c:167: warning: excess elements in struct initializer
rtmp_main.c:167: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:168: unknown field `get_regs' specified in initializer
rtmp_main.c:168: warning: excess elements in struct initializer
rtmp_main.c:168: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:169: unknown field `get_link' specified in initializer
rtmp_main.c:169: warning: excess elements in struct initializer
rtmp_main.c:169: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:170: unknown field `get_eeprom_len' specified in initializer
rtmp_main.c:170: warning: excess elements in struct initializer
rtmp_main.c:170: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:171: unknown field `get_eeprom' specified in initializer
rtmp_main.c:171: warning: excess elements in struct initializer
rtmp_main.c:171: warning: (near initialization for `rt61_ethtool_ops')
rtmp_main.c:162: storage size of `rt61_ethtool_ops' isn't known
make: *** [rtmp_main.o] Error 1
所以进到rtmp_info.c中进行排除错误，就是几个函数的参数缺了，参照其他文件里的此函数参数进行修改就可以。
修改完
rtmp_info.c，make成功生成rt73.o
下载到开发板！
iwlist rausb scanning
能搜索到无线网络，竟然好用了！：）
3、至此，终于解决了在ppc平台上的pci无线网卡和usb无线网卡的移植问题。
大家有探讨的话可以联系我：
大连理工大学MMCL实验室
邮箱：
dlutmcl@foxmail.com
---------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
我已经在PC机上安装WL167G的驱动RT73_Linux_STA_Drv1.0.3.6成功了。
现在移植到深圳诚拓公司的mpc8272开发板上，我已经交叉编译生成了rt73.o，但在开发板上输入：insmod rt73.o，输出下面的错误：rt73.o: unresolved symbol wireless_send_event。
我查了很多资料，说是内核编译是没有加入无线模块wireless.
昨天下午，我从新编译内核make menuconfig
里面在network device support -》Wireless LAN（non-hamradio）里面的全加进来了，忘了还改哪些地方了？，编译出的内核，再insmod rt73.o，出现如下的错误：
rt73.o: unresolved symbol strcmp_Re2d5255a
rt73.o: unresolved symbol dev_base_R9b1a9bda
rt73.o: unresolved symbol tasklet_kill_R79ad224b
rt73.o: unresolved symbol complete_and_exit_R95deffb7
rt73.o: unresolved symbol usb_control_msg_R03e8fd75
rt73.o: unresolved symbol kfree_R037a0cba
rt73.o: unresolved symbol __tasklet_schedule_Rf397b9aa
rt73.o: unresolved symbol loops_per_jiffy_Rba497f13
rt73.o: unresolved symbol ether_setup_Rd3598bbc
rt73.o: unresolved symbol usb_register_R5d076525
rt73.o: unresolved symbol simple_strtol_R0b742fd7
rt73.o: unresolved symbol __save_flags_ptr_R98964d1e
rt73.o: unresolved symbol kill_proc_R932da67e
rt73.o: unresolved symbol strncpy_R328a05f1
rt73.o: unresolved symbol usb_unlink_urb_Ra828949b
rt73.o: unresolved symbol strcat_R061651be
rt73.o: unresolved symbol usb_free_dev_Rfcc08768
rt73.o: unresolved symbol usb_submit_urb_R15079f1a
rt73.o: unresolved symbol strcpy_Re914e41e
rt73.o: unresolved symbol strncmp_R84b183ae
rt73.o: unresolved symbol filp_close_Rb234431c
rt73.o: unresolved symbol strspn_Rc7ec6c27
rt73.o: unresolved symbol usb_alloc_urb_R4fb83213
今天，我从新看内核的忘了把昨天的 .config文件备份，再进行编译内核后，又出现的错误是：
rt73.o: unresolved symbol wireless_send_event
我都弄了一上午也没有得到昨天下午改完的那样的内核。
求助，给点指导！！！！
怎么在mpc8272上移植这个无线网卡
内核编译时应该添进来那些模块部分
谢谢！！
下面是开发板带的.config文件：
#
# Automatically generated by make menuconfig: don't edit
#
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_ADVANCED_OPTIONS=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_8260 is not set
CONFIG_PQII=y
# CONFIG_PQ is not set
# CONFIG_8260 is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_PPC_STD_MMU=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_ISPAN is not set
# CONFIG_MUPQ is not set
CONFIG_MPC8260ADS=y
# CONFIG_ZPC1900 is not set
# CONFIG_SMP is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_KERNEL_START_BOOL=y
CONFIG_KERNEL_START=0xc0000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_TASK_SIZE=0x80000000
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_PCI_PQ2=y
CONFIG_PCI=y
CONFIG_PQ2_IMEM_SNOOPING=y
CONFIG_PQ2_IMEM_PREFETCH=y
CONFIG_NET=y
CONFIG_SYSCTL=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_OOM_KILLER is not set
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_GEN_RTC=y
# CONFIG_CMDLINE_BOOL is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_OBSOLETE_CHIPS=y
# CONFIG_MTD_AMDSTD is not set
CONFIG_MTD_SHARP=y
# CONFIG_MTD_JEDEC is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_TQM8XXL is not set
# CONFIG_MTD_RPXLITE is not set
# CONFIG_MTD_MBX860 is not set
# CONFIG_MTD_DBOX2 is not set
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_REDWOOD is not set
CONFIG_MTD_MPC8260ADS=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_STATS is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
# CONFIG_BLK_DEV_DM is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM is not set
# CONFIG_KHTTPD is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_GMAC is not set
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
CONFIG_EEPRO100_PIO=y
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_FORCEDETH is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_SK98LIN=y
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Console drivers
#
# CONFIG_VGA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_UINPUT is not set
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200 is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
#
# Direct Rendering Manager (XFree86 DRI support)
#
# CONFIG_DRM is not set
CONFIG_ARABELLA_DEVSOC=y
# CONFIG_MPCXXX is not set
# CONFIG_ARABELLA_SEC_TRACE is not set
# CONFIG_ARABELLA_ESP_HW is not set
# CONFIG_ARABELLA_AH_HW is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT3_FS_XATTR_SHARING is not set
# CONFIG_EXT3_FS_XATTR_USER is not set
# CONFIG_EXT3_FS_XATTR_TRUSTED is not set
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XATTR_SHARING is not set
# CONFIG_EXT2_FS_XATTR_USER is not set
# CONFIG_EXT2_FS_XATTR_TRUSTED is not set
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_SMB_UNIX=y
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_FS_POSIX_ACL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# Arabella MPC82xx Integrated Peripherals
#
CONFIG_STDIO_CONSOLE=y
CONFIG_SERIAL_CONSOLE_PORT=0
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
CONFIG_FCC1_ENET=y
CONFIG_FCC2_ENET=y
CONFIG_FCC3_ENET=y
# CONFIG_MPCSEC_ON_CHIP is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI=y
# CONFIG_USB_UHCI_ALT is not set
CONFIG_USB_OHCI=y
# CONFIG_USB_PQ2_HC is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_PQ2_TTY is not set
# CONFIG_USB_PQ_TTY is not set
#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_FW_LOADER is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=0 |
|
IP卡
狗仔卡
发表于 2008-2-28 11:14:34
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主