|
|
发表于 2008-3-14 12:05:56
|
显示全部楼层
我在我的ppc平台上也没有移植成功
但能交叉编译通过
我的Makefie：
###########################################################################
# RT2400/RT2500 SourceForge Project - http://rt2x00.serialmonkey.com #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the #
# Free Software Foundation, Inc., #
# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. #
# #
# Licensed under the GNU GPL #
# Original code supplied under license from RaLink Inc, 2004. #
###########################################################################
###########################################################################
# Module Name: Makefile
#
# Abstract: Makefile for rt73 kernel module
#
# Revision History:
# Who When What
# -------- ----------- -----------------------------
# MarkW (rt2500) 21st Jan 06 Rewrite of Makefile
# Amir S (rt2500) 2nd Feb 06 Update for gmake compat
# MarkW (rt2500) 3rd Feb 06 Fixed permissions on directory
# MichaIL(rt2500) 13th Feb 06 Module installation fixes
# MarkW (rt2500) 13th Feb 06 Allow install dir override
# OlivierC 14th May 07 Install firmware file
# OlivierC 14th May 07 Check old config
###########################################################################
MODULE_NAME := rt73
IF_NAME := wlan*
FIRMWARES := rt73.bin
FIRM_DIR := /lib/firmware
OLD_IF_NAME := ra0
CONFIG_DIR := /etc/Wireless/RT73STA
CONFIG_FILE := rt73sta.dat
ifeq ($(PATCHLEVEL),)
PATCHLEVEL := $(shell uname -r | cut -d. -f2)
endif
$(MODULE_NAME)-objs := rtmp_main.o mlme.o connect.o rtusb_bulk.o rtusb_io.o \
sync.o assoc.o auth.o auth_rsp.o rtusb_data.o \
rtmp_init.o sanity.o rtmp_wep.o rtmp_info.o \
rtmp_tkip.o wpa.o md5.o rt2x00debug.o
ifdef TOPDIR
obj-m += $(MODULE_NAME).o
endif
EXTRA_CFLAGS += -I$(src)
EXTRA_CFLAGS += -DAGGREGATION_SUPPORT -DWMM_SUPPORT
#EXTRA_CFLAGS += -DRALINK_ATE
#EXTRA_CFLAGS += -DSINGLE_ADHOC_LINKUP
#ifdef KERNDIR
# KERNEL_SOURCES := $(KERNDIR)
#else
# KERNEL_SOURCES := /lib/modules/$(shell uname -r)/build
#endif
#######################################
#xxf
KERNEL_SOURCES :=/mpc8272/kernel-2.4.26-free
CC := /mpc8272/powerpc-gcc/bin/powerpc-linux-gcc
LD := /mpc8272/powerpc-gcc/bin/powerpc-linux-ld
#####################################
ifdef MODDIR
MODULE_ROOT := $(MODDIR)
else
MODULE_ROOT := /lib/modules/$(shell uname -r)/extra
endif
ifdef KERNOUT
KERNEL_OUTPUT := KBUILD_OUTPUT=$(KERNOUT)
else
KERNEL_OUTPUT :=
endif
src ?= .
obj ?= .
ifeq ($(PATCHLEVEL), 4)
MODULE_OBJECT := $(MODULE_NAME).o
MODULE_CONF := /etc/modules.conf
else
MODULE_OBJECT := $(MODULE_NAME).ko
MODULE_CONF := /etc/modprobe.d/ralink
endif
all: module
ifeq ($(PATCHLEVEL), 4)
$(obj)/$(MODULE_NAME).o: $($(MODULE_NAME)-objs)
$(LD) $(EXTRA_LDFLAGS) -r -o $@ $($(MODULE_NAME)-objs)
endif
KBUILD_PARAMS := -C $(KERNEL_SOURCES) SUBDIRS=$(CURDIR) $(KERNEL_OUTPUT)
MODULE_CHECK := if ! [ -f $(MODULE_OBJECT) ]; then \
echo "$(MODULE_OBJECT) failed to build!"; \
exit 1; \
fi; \
if [ `du -b $(MODULE_OBJECT) | sed -e 's/\t.*//g'` -gt 1000000 ]; then \
echo "!!! WARNING: Module file much too big (>1MB)"; \
echo "!!! Check your kernel settings or use 'strip'"; \
fi; \
echo "*** Module $(MODULE_OBJECT) built successfully"
module:
@$(MAKE) $(KBUILD_PARAMS) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS)' modules; \
$(MODULE_CHECK)
arm:
@$(MAKE) $(KBUILD_PARAMS) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS) \
-DRTMP_EMBEDDED' \
modules; \
$(MODULE_CHECK)
armdebug:
@$(MAKE) $(KBUILD_PARAMS) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS) \
-DRTMP_EMBEDDED -DDBG' \
modules; \
$(MODULE_CHECK)
debug:
@$(MAKE) $(KBUILD_PARAMS) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS) \
-DDBG' modules; \
$(MODULE_CHECK)
debugfs:
@$(MAKE) $(KBUILD_PARAMS) 'EXTRA_CFLAGS=$(EXTRA_CFLAGS) \
-DDBG -DRT2X00DEBUGFS' modules; \
$(MODULE_CHECK)
clean:
@rm -f *.o .*.{cmd,flags}
@rm -f $(MODULE_NAME).{o,ko,mod.{o,c}} built-in.o $(VERSION_HEADER) *~
@rm -fr .tmp_versions Module.symvers
modules_install:
@if ! [ -f $(MODULE_OBJECT) ]; then \
echo "!!! $(MODULE_OBJECT) does not exist: run 'make'"; \
exit 1; \
fi
@echo "*** Install module in $(MODULE_ROOT) ..."
ifeq ($(PATCHLEVEL),4)
install -m 755 -o 0 -g 0 -d $(MODULE_ROOT)
install -m 644 -o 0 -g 0 $(MODULE_OBJECT) $(MODULE_ROOT)
else
@$(MAKE) $(KBUILD_PARAMS) modules_install
endif
/sbin/depmod -a
install: modules_install
@echo "*** Update $(MODULE_CONF) alias for $(IF_NAME)"; \
if [ -d `dirname $(MODULE_CONF)` ]; then \
if [ -s $(MODULE_CONF) ]; then \
if ! grep -q '$(IF_NAME)' $(MODULE_CONF) ; then \
echo "alias $(IF_NAME) $(MODULE_NAME)" >> $(MODULE_CONF) ; \
fi; \
else \
echo "alias $(IF_NAME) $(MODULE_NAME)" >> $(MODULE_CONF) ; \
fi; \
if grep -q '$(OLD_IF_NAME)' $(MODULE_CONF) ; then \
echo "!!! -> $(OLD_IF_NAME) interface name is deprecated:" \
"remove old $(MODULE_CONF) alias"; \
fi; \
else \
echo "*** Config dir `dirname $(MODULE_CONF)` not found" >&2; \
fi
@echo "*** Install firmware in $(FIRM_DIR) ..."; \
if ! [ -d $(FIRM_DIR) ]; then \
mkdir $(FIRM_DIR); \
fi; \
cp -f $(FIRMWARES) $(FIRM_DIR)
@echo "*** Check old config ..."; \
if [ -d $(CONFIG_DIR) ]; then \
echo "!!!"; \
echo "!!! WARNING: DEPRECATED CONFIG FOUND !"; \
echo "!!!"; \
echo "!!! -> Update your config and remove $(CONFIG_DIR)"; \
if [ -f $(CONFIG_DIR)/$(CONFIG_FILE) ]; then \
echo "!!! -> $(CONFIG_FILE) file is deprecated:" \
"use iwconfig/iwpriv instead"; \
fi; \
if [ -f $(CONFIG_DIR)/$(FIRMWARES) ]; then \
echo "!!! -> $(FIRMWARES) firmware has moved to $(FIRM_DIR)"; \
fi; \
fi
ifeq ($(PATCHLEVEL), 4)
include $(KERNEL_SOURCES)/Rules.make
endif |
|
IP卡
狗仔卡
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主
utput pipe has been closed