LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1513|回复: 8

[求助]t60 cpu温度高

[复制链接]
发表于 2008-6-28 17:23:26 | 显示全部楼层 |阅读模式
关键词  菜鸟 看了精华和wiki

正常使用温度在65-75度之间

开了wow飙升至85度以上

执行sensors如下:

[reanus@reanus-laptop World of Warcraft]$ sensors
thinkpad-isa-0000
Adapter: ISA adapter
fan1:       3405 RPM
temp1:       +66.0°C                                    
temp2:       +45.0°C                                    
temp3:       +44.0°C                                    
temp4:       +75.0°C                                    
temp5:       +39.0°C                                    
ERROR: Can't get value of subfeature temp6_input: Can't read
temp6:        +0.0°C                                    
temp7:       +37.0°C                                    
ERROR: Can't get value of subfeature temp8_input: Can't read
temp8:        +0.0°C                                    
temp9:       +45.0°C                                    
temp10:      +56.0°C                                    
temp11:      +57.0°C                                    
ERROR: Can't get value of subfeature temp12_input: Can't read
temp12:       +0.0°C                                    
ERROR: Can't get value of subfeature temp13_input: Can't read
temp13:       +0.0°C                                    
ERROR: Can't get value of subfeature temp14_input: Can't read
temp14:       +0.0°C                                    
ERROR: Can't get value of subfeature temp15_input: Can't read
temp15:       +0.0°C                                    
ERROR: Can't get value of subfeature temp16_input: Can't read
temp16:       +0.0°C                                    

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +67.0°C  (crit = +100.0°C)                  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +67.0°C  (crit = +100.0°C)   


执行cpufreq-info如下
[reanus@reanus-laptop World of Warcraft]$ cpufreq-info
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to linux@brodo.de, please.
analyzing CPU 0:
  driver: acpi-cpufreq
  CPUs which need to switch frequency at the same time: 0 1
  hardware limits: 1000 MHz - 2.00 GHz
  available frequency steps: 2.00 GHz, 1.67 GHz, 1.33 GHz, 1000 MHz
  available cpufreq governors: conservative, powersave, ondemand, performance
  current policy: frequency should be within 1000 MHz and 2.00 GHz.
                  The governor "performance" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.
analyzing CPU 1:
  driver: acpi-cpufreq
  CPUs which need to switch frequency at the same time: 0 1
  hardware limits: 1000 MHz - 2.00 GHz
  available frequency steps: 2.00 GHz, 1.67 GHz, 1.33 GHz, 1000 MHz
  available cpufreq governors: conservative, powersave, ondemand, performance
  current policy: frequency should be within 1000 MHz and 2.00 GHz.
                  The governor "performance" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.

sensors里的风扇转速已经显示3460(最大?)  可是声音很小 和其他网友们说的最大转速非常吵不一致

请各位高手帮忙解决啊
发表于 2008-6-28 20:24:07 | 显示全部楼层
acpi装了没有?
回复 支持 反对

使用道具 举报

发表于 2008-6-28 22:13:15 | 显示全部楼层
ibm的什么都比较特殊,控制风扇的好像有专门的软件,wiki里面好像有。。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-6-28 22:16:31 | 显示全部楼层
Post by sharkconi;1868753
acpi装了没有?


装了  我想问 这个温度是正常还是高?  转速3460耳朵不靠近到出风口就几乎听不见风扇响正常不?  各位大侠们帮忙阿
回复 支持 反对

使用道具 举报

发表于 2008-6-28 23:39:36 | 显示全部楼层
我觉得正常。。
回复 支持 反对

使用道具 举报

发表于 2008-6-29 00:35:39 | 显示全部楼层
高了点~~~
回复 支持 反对

使用道具 举报

发表于 2008-6-29 11:23:29 | 显示全部楼层
我记得lm_sensors的文档里说好像不能用于Thinkpad。
回复 支持 反对

使用道具 举报

发表于 2008-6-29 11:44:41 | 显示全部楼层
哪里看到的85度?
回复 支持 反对

使用道具 举报

发表于 2008-6-29 12:52:44 | 显示全部楼层
t60的风扇3460是第二档,不是最大。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表