|
用的事PCM7230开发板。。给板子重新烧内核。。
download kernel和ramdisk.gz
flash ..
最后boot
但是终端一直显示uncompressing Linux.......(正在打开内核)
后面就没了。问题出在哪???
贴上超级终端运行结果
**************************************************
** Intrinsyc Bootloader (IBoot) **
** Copyright 2001,2002 Intrinsyc Software Inc. **
** Version: 1.7 **
** Support: http://www.intrinsyc.com **
**************************************************
ERROR: No SMSC LAN91C111 was detected at 0C000000
0
Can't find kernel and ramdisk in socket 0
serial_number: 003224I1104C1707
firmware_revision: HDX 2.15
model_number: SanDisk SDCFJ-256
Could not find kernel
Could not find ramdisk.gz
Can't find kernel and ramdisk in socket 1
Relocating zImage from 040C0000 to A0008000 (len=00100000)
Relocating ramdisk.gz from 041C0000 to A1000000 (len=00800000)
Proper ARM zImage ID found. Booting...
Uncompressing Linux................................................... done, boo
ting the kernel. |
|