Thinkpad X61的显卡驱动问题

easior lars

上网看了一下，
作了如下配置：

内核编译部分drm模块设置 i915，

之后，在make.conf中
VIDEO_CARDS="intel"

emerge xorg-server之后启用了intel的驱动。

但是现在问题是，只要执行Xorg-configure，
就会报错：检测到的显示器数目和。。。不符？
这个报错信息不知道怎么弄出来，看了一下log，大概就是screen 0。

不知道哪位指点一下？实在是搞不定了。

不知道是驱动问题还是配置文件没写好？

Hooong

现在好像不用设置xorg.conf了吧，或者试试这个“xorgcfg -textmode”

easior lars

Post by Hooong;2135405
现在好像不用设置xorg.conf了吧，或者试试这个“xorgcfg -textmode”

请问相关的文档在哪里？

waterloo2005

thinkwiki 和gentoo wiki 看看

easior lars

Post by waterloo2005;2135429
thinkwiki 和gentoo wiki 看看

哪位大侠能去墙外把这个网页
http://br1.einfach.org/wiki/GentooX61
的内容发给我：easiorhu@gmail.com

谢谢。

pingz

Post by easior lars;2135465
哪位大侠能去墙外把这个网页
http://br1.einfach.org/wiki/GentooX61
的内容发给我：easiorhu@gmail.com

谢谢。

...
404 Not Found

已经失效了……

Post by easior lars;2135426
请问相关的文档在哪里？

Xorg supports several mechanisms for supplying/obtaining configuration and run-time parameters: command line options, environment variables, the xorg.conf and org.conf.d configuration files, auto-detection, and fallback defaults. When the same information is supplied in more than one way, the highest precedence mechanism is used.  The list of mechanisms is ordered from highest precedence to lowest. Note that not all parameters can be supplied via all methods. The available command line options and environment variables (and some defaults) are described in the Xserver(1) and Xorg(1) manual pages. Most configuration file parameters, with their defaults, are described below. Driver and module specific configuration parameters are described in the relevant driver or module manual page.

http://www.x.org/releases/current/doc/man/man5/xorg.conf.5.xhtml

easior lars

Thank you. I have solved this problem.
It is that display device support in kernel configurations was not selected.