|
- OpenLab:/usr/bin # ifconfig
- eth0 Link encap:Ethernet HWaddr 52:54:AB:57:0C:28
- inet addr:192.168.32.57 Bcast:192.168.33.255 Mask:255.255.254.0
- inet6 addr: fe80::5054:abff:fe57:c28/64 Scope:Link
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:4211 errors:0 dropped:0 overruns:0 frame:0
- TX packets:4500 errors:0 dropped:0 overruns:0 carrier:0
- collisions:43 txqueuelen:100
- RX bytes:757887 (740.1 Kb) TX bytes:368074 (359.4 Kb)
- Interrupt:5 Base address:0xc800
- eth0:0 Link encap:Ethernet HWaddr 52:54:AB:57:0C:28
- inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- Interrupt:5 Base address:0xc800
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- inet6 addr: ::1/128 Scope:Host
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:1285 errors:0 dropped:0 overruns:0 frame:0
- TX packets:1285 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:141844 (138.5 Kb) TX bytes:141844 (138.5 Kb)
- OpenLab:/usr/bin # iptables -t nat -A POSTROUTING -o eth0:0 -s 192.168.1.0/24 -j SNAT --to 192.168.32.57
- Warning: wierd character in interface `eth0:0' (No aliases, :, ! or *).
复制代码
Why cann't use eth0:0? |
|