FreeBSD中vmware的问题！

fzfh

安装可以完成，但是网络上有点问题。
我是用的是bridge模式，绑定在机器的物理网卡vr0上，但是没有办法在给vmnet1分配何物理完卡同网段的ip。
dmesg的信息如下：
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #0: Sun Aug 29 20:47:55 GMT 2004
    root@unix:/usr/src/sys/i386/compile/fzfh
Preloaded elf kernel "/boot/kernel/kernel" at 0xc095a000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc095a1cc.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc095a278.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc095a328.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc095a3d4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2004.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 511766528 (488 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc06b7b02 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIAP4X AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdea0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <ower Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 14 INTA is routed to irq 11
pcib0: slot 16 INTA is routed to irq 10
pcib0: slot 16 INTB is routed to irq 5
pcib0: slot 16 INTC is routed to irq 11
pcib0: slot 16 INTD is routed to irq 12
pcib0: slot 17 INTC is routed to irq 11
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <CI-PCI bridge> at device 1.0 on pci0
pci1: <CI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
nvidia0: <GeForce2 MX/MX 400> mem 0xd8000000-0xdfffffff,0xe0000000-0xe0ffffff irq 10 at device 0.0 on pci1
pci0: <simple comms> at device 10.0 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xd000-0xd0ff mem 0xe2400000-0xe24000ff irq 11 at device 14.0 on pci0
vr0: Ethernet address: 00:40:63:c0:c0:1b
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
ums0: vendor 0x1241 product 0x1111, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: port error, restarting port 1
uhub2: port error, giving up port 1
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <CI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xe000-0xe00f at device 17.1 on pci0ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 11 at device 17.5 on pci0
pcm0: <ICEnsemble VT1616 AC97 Codec>
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <arallel port bus> on ppc0
plip0: <LIP network interface> on ppbus0
ppi0: <arallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2004560532 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc480e860
ad0: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata0-master UDMA133
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: CDRW <CD-RW IDE5232> at ata1-master UDMA33
acd1: CDROM <ATAPI-CD ROM-DRIVE-52MAX> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s3a
WARNING: driver "vmmon" used unreserved major device number 200
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
vr0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
WARNING: driver "rtc" used unreserved major device number 202
Warning: pid 620 used static ldt allocation.
See the i386_set_ldt man page for more info
rtc: 100 > kern.hz: Timing will be inaccurate, please increase hz.
vmmon: Vmx86_ReleaseVM: unlocked pages: 48656, unlocked dirty pages: 32658
vmmon: Module vmmon: unloaded
vr0: promiscuous mode disabled
vmnet1: promiscuous mode disabled
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
vr0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
vmmon: Module vmmon: unloaded
vr0: promiscuous mode disabled
vmnet1: promiscuous mode disabled

提示vmmon何vmnet出现问题。
请问各位大虾该如何解决？
谢谢！

fzfh

没有人help一下吗？
自己顶一下

linfeng.CN

用NAT方式呢?