|
安装双linux系统和Windows XP 三个系统共存于一块硬盘
我今天安装了最新推出的 FC5,在新建建分区时只建立了一个根分区,共用原来 Redhat 9.0 的 swap 分区 ,安装完后,原来的 Redhat 9.0 进不去了。我的解决办法如下:进入FC5以后,用 gedit 打开/boot/grub/grub.conf,内容如下:# grub.conf generated by anaconda## Note that you do not have to rerun grub after making changes to this file# NOTICE: You do not have a /boot partition. This means that# all kernel and initrd paths are relative to /, eg.# root (hd0,12)# kernel /boot/vmlinuz-version ro root=/dev/hda13# initrd /boot/initrd-version.img#boot=/dev/hdadefault=0timeout=10splashimage=(hd0,12)/boot/grub/splash.xpm.gzhiddenmenutitle Fedora Core (2.6.15-1.2054_FC5) root (hd0,12) kernel /boot/vmlinuz-2.6.15-1.2054_FC5 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.15-1.2054_FC5.imgtitle Windows XP rootnoverify (hd0,0) chainloader +1再用fdisk命令查看我的磁盘情况,如下:[root@zeckey root]# fdisk -l Disk /dev/hda: 160.0 GB, 160041885696 bytes255 heads, 63 sectors/track, 19457 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System/dev/hda1 * 1 1275 10241406 7 HPFS/NTFS/dev/hda3 1276 19457 146046915 f Win95 Ext'd (LBA)/dev/hda5 1276 1288 104391 b Win95 FAT32/dev/hda6 1289 3196 15325978+ b Win95 FAT32/dev/hda7 3197 6281 24780231 b Win95 FAT32/dev/hda8 6282 10743 35840983+ b Win95 FAT32/dev/hda9 10744 14847 32965348+ b Win95 FAT32/dev/hda10 14848 16172 10643031 b Win95 FAT32/dev/hda11 17620 19330 13743576 83 Linux/dev/hda12 19331 19457 1020096 82 Linux swap/dev/hda13 16173 17619 11622996 83 Linux可以发现我的硬盘上只有三个linux分区,一个swap分区,另外两个就是FC5和Redhat 9.0了。为了能够进Redhat 9.0,只需在 /boot/grub/grub.conf 文件中添加上Redhat 9.0的起动路径就行了。修改/boot/grub/grub.conf文件如下:# grub.conf generated by anaconda## Note that you do not have to rerun grub after making changes to this file# NOTICE: You do not have a /boot partition. This means that# all kernel and initrd paths are relative to /, eg.# root (hd0,12)# kernel /boot/vmlinuz-version ro root=/dev/hda13# initrd /boot/initrd-version.img#boot=/dev/hdadefault=0timeout=10splashimage=(hd0,12)/boot/grub/splash.xpm.gzhiddenmenutitle Fedora Core (2.6.15-1.2054_FC5) root (hd0,12) kernel /boot/vmlinuz-2.6.15-1.2054_FC5 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.15-1.2054_FC5.imgtitle Red Hat Linux 9.0 (2.4.20-8) root (hd0,10) kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/ initrd /boot/initrd-2.4.20-8.imgtitle Windows XP rootnoverify (hd0,0) chainloader +1说明:“title Red Hat Linux 9.0 (2.4.20-8)” 这里是在起动时 grub 界面上显示的标题。“root (hd0,10) ”表示我的电脑上第一块硬盘,第11个分区,比实际数字小一。这是要特别注意的地方。就像上面看到的 “/dev/hda11 17620 19330 13743576 83 Linux ”这一项。"kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/" "initrd /boot/initrd-2.4.20-8.img" 这两项表示Redhat 9.0的起动文件和内核映象文件。我在修改中遇到的问题:开始时我修改的是这样的:title Red Hat Linux (2.4.20-8) root (hd0,10) kernel /vmlinuz-2.4.20-8 ro root=LABEL=/ initrd /initrd-2.4.20-8.img结果起动时找不到,这是因为我在安装Redhat9.0时 ,新建建分区时没有选择新建 /boot 分区,只建了一个swap分区和根分区 / ,所以我的 kernel 和 initrd 都在/boot下。当然不在根分区下,所以就找不到。*************************************************************************** Name : 安装双linux系统和Windows XP 三个系统共存于一块硬盘** Author :魏自立 ** Date :2006/03/28** Email : zieckey@yahoo.com.cn** All right reserved.** 本文可以自由转载,但请不要去掉版权信息,也不要用于商业用途 ************************************************************************* |
|