|
发表于 2003-3-15 11:43:03
|
显示全部楼层
1.下载威盛官方驱动下载(要分系统版本)http://www.viaarena.com/?PageID=128
2.安装之前需要做两件事
首先按照下面步骤删除以前的安装
A.操作系统自驱
#modprobe -r via82cxxx_audio
B.VIA声卡驱动(改变目录到VIA声卡驱动文件夹)
#./vunstall
C.ALSA
#modprobe -r snd-pcm-oss
#modprobe -r snd-seq-oss
#modprobe -r snd-mixer-oss
#modprobe -r snd-card-via8233 (针对VT8233/VT8233C)
#modprobe -r snd-card-via686a (针对VT82C686B/VT8231)
D.OSS
方法一:
#cd /usr/lib/oss
#./soundoff (关闭oss驱动)
方法二:
#cd /usr/lib/oss
#./uninstall.sh (卸载oss驱动)
接着,如果你安装了其他声卡驱动,就要备份"/etc/modules.conf"文件。如果有个 三长两短,你还可以用备份来恢复。注意:在卸载原来的驱动以前,一定要终止所有 与声卡有关的应用并确信声卡没有被使用,用"#lsmod"命令可以确认声卡是否被加载了。
3.安装威盛声卡驱动(以 RH8.0为例)
下载安装方法:http://downloads.viaarena.com/Li ... ver%20ver%200.8A.gz
{This document describes three methods of installing the audio driver for VIA south bridge chips VT8231, VT8233, VT8233A, and VT8235 under Red Hat Linux 8.0. These methods include: (1) OS built-in driver (only for VT8231), (2) ALSA driver from the Advanced Linux Sound Architecture project, and (3) OSS driver from 4Front Technologies. The step-by-step instruction for each method and a comparison of their respective features are provided.)
|
|