设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Archlinux讨论区 › WebCam摄像头安装问题
返回列表 发新帖
查看: 1722|回复: 3

WebCam摄像头安装问题

[复制链接]
kenzhong
发表于 2008-3-2 07:18:40 | 显示全部楼层 |阅读模式
我在Samsung R70上安装不了摄像头. 用gspcav和linux-uvc都不行.
请大家帮个忙.

下面是两种不同驱动时出现的信息

(1)在gspcav下
gspcav安装了, 但没有/dev/video0.

#lsmod|grep gspca
gspca                 691664  0
compat_ioctl32          9600  1 gspca
videodev               27648  1 gspca
usbcore               148272  6 hci_usb,gspca,usbhid,ehci_hcd,uhci_hcd

#modinfo gspcav
  1. filename:       /lib/modules/2.6.24-ARCH/kernel/drivers/media/video/usbvideo/gspca.ko
  2. license:        GPL
  3. description:    GSPCA/SPCA5XX USB Camera Driver
  4. author:         Michel Xhaard <mxhaard@users.sourceforge.net> based on spca50x driver by Joel Crisp <cydergoth@users.sourceforge.net>,ov511 driver by Mark McClelland <mwm@i.am>
  5. alias:          usb:v093Ap2463d*dc*dsc*dp*ic*isc*ip*
  6. alias:          usb:v093Ap2472d*dc*dsc*dp*ic*isc*ip*
  7. alias:          usb:v046Dp08AFd*dc*dsc*dp*ic*isc*ip*
  8. alias:          usb:v046Dp08DDd*dc*dsc*dp*ic*isc*ip*
  9. alias:          usb:v17EFp4802d*dc*dsc*dp*ic*isc*ip*
  10. alias:          usb:v0AC8p0323d*dc*dsc*dp*ic*isc*ip*
  11. alias:          usb:v0471p0330d*dc*dsc*dp*ic*isc*ip*
  12. alias:          usb:v0C45p60ECd*dc*dsc*dp*ic*isc*ip*
  13. alias:          usb:v0AC8p0328d*dc*dsc*dp*ic*isc*ip*
  14. alias:          usb:v0AC8p307Bd*dc*dsc*dp*ic*isc*ip*
  15. alias:          usb:v0D64p0303d*dc*dsc*dp*ic*isc*ip*
  16. alias:          usb:v0471p0322d*dc*dsc*dp*ic*isc*ip*
  17. alias:          usb:v093Ap260Fd*dc*dsc*dp*ic*isc*ip*
  18. alias:          usb:v093Ap260Ed*dc*dsc*dp*ic*isc*ip*
  19. alias:          usb:v093Ap2608d*dc*dsc*dp*ic*isc*ip*
  20. alias:          usb:v093Ap2603d*dc*dsc*dp*ic*isc*ip*
  21. alias:          usb:v093Ap2601d*dc*dsc*dp*ic*isc*ip*
  22. alias:          usb:v093Ap2600d*dc*dsc*dp*ic*isc*ip*
  23. alias:          usb:v0458p7025d*dc*dsc*dp*ic*isc*ip*
  24. alias:          usb:v041Ep401Ad*dc*dsc*dp*ic*isc*ip*
  25. alias:          usb:v0C45p6138d*dc*dsc*dp*ic*isc*ip*
  26. alias:          usb:v0471p032Ed*dc*dsc*dp*ic*isc*ip*
  27. alias:          usb:v0AC8pC001d*dc*dsc*dp*ic*isc*ip*
  28. alias:          usb:v06D6p0031d*dc*dsc*dp*ic*isc*ip*
  29. alias:          usb:v0471p032Dd*dc*dsc*dp*ic*isc*ip*
  30. alias:          usb:v045Ep00F5d*dc*dsc*dp*ic*isc*ip*
  31. alias:          usb:v045Ep00F7d*dc*dsc*dp*ic*isc*ip*
  32. alias:          usb:v046Dp0896d*dc*dsc*dp*ic*isc*ip*
  33. alias:          usb:v046Dp0892d*dc*dsc*dp*ic*isc*ip*
  34. alias:          usb:v0AC8p0321d*dc*dsc*dp*ic*isc*ip*
  35. alias:          usb:v0AC8pC002d*dc*dsc*dp*ic*isc*ip*
  36. alias:          usb:v0C45p60FBd*dc*dsc*dp*ic*isc*ip*
  37. alias:          usb:v0C45p613Bd*dc*dsc*dp*ic*isc*ip*
  38. alias:          usb:v0C45p612Cd*dc*dsc*dp*ic*isc*ip*
  39. alias:          usb:v08CAp2040d*dc*dsc*dp*ic*isc*ip*
  40. alias:          usb:v046Dp08D8d*dc*dsc*dp*ic*isc*ip*
  41. alias:          usb:v046Dp08D7d*dc*dsc*dp*ic*isc*ip*
  42. alias:          usb:v041Ep4053d*dc*dsc*dp*ic*isc*ip*
  43. alias:          usb:v041Ep041Ed*dc*dsc*dp*ic*isc*ip*
  44. alias:          usb:v041Ep4029d*dc*dsc*dp*ic*isc*ip*
  45. alias:          usb:v041Ep4051d*dc*dsc*dp*ic*isc*ip*
  46. alias:          usb:v046Dp092Fd*dc*dsc*dp*ic*isc*ip*
  47. alias:          usb:v046Dp092Ed*dc*dsc*dp*ic*isc*ip*
  48. alias:          usb:v046Dp092Dd*dc*dsc*dp*ic*isc*ip*
  49. alias:          usb:v046Dp08DAd*dc*dsc*dp*ic*isc*ip*
  50. alias:          usb:v046Dp08D9d*dc*dsc*dp*ic*isc*ip*
  51. alias:          usb:v046Dp08ACd*dc*dsc*dp*ic*isc*ip*
  52. alias:          usb:v055FpC232d*dc*dsc*dp*ic*isc*ip*
  53. alias:          usb:v04FCp500Cd*dc*dsc*dp*ic*isc*ip*
  54. alias:          usb:v046Dp08A7d*dc*dsc*dp*ic*isc*ip*
  55. alias:          usb:v0C45p6024d*dc*dsc*dp*ic*isc*ip*
  56. alias:          usb:v0C45p6019d*dc*dsc*dp*ic*isc*ip*
  57. alias:          usb:v0471p0326d*dc*dsc*dp*ic*isc*ip*
  58. alias:          usb:v0471p0327d*dc*dsc*dp*ic*isc*ip*
  59. alias:          usb:v0C45p6007d*dc*dsc*dp*ic*isc*ip*
  60. alias:          usb:v055FpC230d*dc*dsc*dp*ic*isc*ip*
  61. alias:          usb:v0C45p6040d*dc*dsc*dp*ic*isc*ip*
  62. alias:          usb:v0471p0328d*dc*dsc*dp*ic*isc*ip*
  63. alias:          usb:v0471p0325d*dc*dsc*dp*ic*isc*ip*
  64. alias:          usb:v041Ep4028d*dc*dsc*dp*ic*isc*ip*
  65. alias:          usb:v0C45p6001d*dc*dsc*dp*ic*isc*ip*
  66. alias:          usb:v0698p2003d*dc*dsc*dp*ic*isc*ip*
  67. alias:          usb:v08CAp2020d*dc*dsc*dp*ic*isc*ip*
  68. alias:          usb:v046Dp08A6d*dc*dsc*dp*ic*isc*ip*
  69. alias:          usb:v093Ap2470d*dc*dsc*dp*ic*isc*ip*
  70. alias:          usb:v0733p3281d*dc*dsc*dp*ic*isc*ip*
  71. alias:          usb:v093Ap2460d*dc*dsc*dp*ic*isc*ip*
  72. alias:          usb:v093Ap2471d*dc*dsc*dp*ic*isc*ip*
  73. alias:          usb:v093Ap2468d*dc*dsc*dp*ic*isc*ip*
  74. alias:          usb:v0AC8p303Bd*dc*dsc*dp*ic*isc*ip*
  75. alias:          usb:v041Ep4012d*dc*dsc*dp*ic*isc*ip*
  76. alias:          usb:v0497pC001d*dc*dsc*dp*ic*isc*ip*
  77. alias:          usb:v04F1p1001d*dc*dsc*dp*ic*isc*ip*
  78. alias:          usb:v046Dp08AAd*dc*dsc*dp*ic*isc*ip*
  79. alias:          usb:v046Dp08A9d*dc*dsc*dp*ic*isc*ip*
  80. alias:          usb:v0C45p6028d*dc*dsc*dp*ic*isc*ip*
  81. alias:          usb:v0AC8p305Bd*dc*dsc*dp*ic*isc*ip*
  82. alias:          usb:v0546p3191d*dc*dsc*dp*ic*isc*ip*
  83. alias:          usb:v0C45p60FCd*dc*dsc*dp*ic*isc*ip*
  84. alias:          usb:v0C45p60C0d*dc*dsc*dp*ic*isc*ip*
  85. alias:          usb:v0C45p6130d*dc*dsc*dp*ic*isc*ip*
  86. alias:          usb:v0C45p613Cd*dc*dsc*dp*ic*isc*ip*
  87. alias:          usb:v0C45p6005d*dc*dsc*dp*ic*isc*ip*
  88. alias:          usb:v0C45p602Dd*dc*dsc*dp*ic*isc*ip*
  89. alias:          usb:v046Dp08ADd*dc*dsc*dp*ic*isc*ip*
  90. alias:          usb:v055FpC630d*dc*dsc*dp*ic*isc*ip*
  91. alias:          usb:v0458p7006d*dc*dsc*dp*ic*isc*ip*
  92. alias:          usb:v093Ap050Fd*dc*dsc*dp*ic*isc*ip*
  93. alias:          usb:v0C45p602Cd*dc*dsc*dp*ic*isc*ip*
  94. alias:          usb:v0C45p602Ed*dc*dsc*dp*ic*isc*ip*
  95. alias:          usb:v046Dp092Bd*dc*dsc*dp*ic*isc*ip*
  96. alias:          usb:v055FpD004d*dc*dsc*dp*ic*isc*ip*
  97. alias:          usb:v046Dp08AEd*dc*dsc*dp*ic*isc*ip*
  98. alias:          usb:v041Ep4035d*dc*dsc*dp*ic*isc*ip*
  99. alias:          usb:v041Ep4034d*dc*dsc*dp*ic*isc*ip*
  100. alias:          usb:v041Ep401Cd*dc*dsc*dp*ic*isc*ip*
  101. alias:          usb:v0733p1314d*dc*dsc*dp*ic*isc*ip*
  102. alias:          usb:v0733p3261d*dc*dsc*dp*ic*isc*ip*
  103. alias:          usb:v0C45p607Cd*dc*dsc*dp*ic*isc*ip*
  104. alias:          usb:v046Dp092Cd*dc*dsc*dp*ic*isc*ip*
  105. alias:          usb:v06BDp0404d*dc*dsc*dp*ic*isc*ip*
  106. alias:          usb:v2899p012Cd*dc*dsc*dp*ic*isc*ip*
  107. alias:          usb:v06BEp0800d*dc*dsc*dp*ic*isc*ip*
  108. alias:          usb:v04FCp7333d*dc*dsc*dp*ic*isc*ip*
  109. alias:          usb:v102Cp6251d*dc*dsc*dp*ic*isc*ip*
  110. alias:          usb:v102Cp6151d*dc*dsc*dp*ic*isc*ip*
  111. alias:          usb:v10FDp0128d*dc*dsc*dp*ic*isc*ip*
  112. alias:          usb:v046Dp0929d*dc*dsc*dp*ic*isc*ip*
  113. alias:          usb:v046Dp08B9d*dc*dsc*dp*ic*isc*ip*
  114. alias:          usb:v046Dp08A3d*dc*dsc*dp*ic*isc*ip*
  115. alias:          usb:v046Dp08A1d*dc*dsc*dp*ic*isc*ip*
  116. alias:          usb:v04FCp5360d*dc*dsc*dp*ic*isc*ip*
  117. alias:          usb:v08CAp2060d*dc*dsc*dp*ic*isc*ip*
  118. alias:          usb:v08CAp2042d*dc*dsc*dp*ic*isc*ip*
  119. alias:          usb:v08CAp2028d*dc*dsc*dp*ic*isc*ip*
  120. alias:          usb:v0461p0A00d*dc*dsc*dp*ic*isc*ip*
  121. alias:          usb:v046Dp08A0d*dc*dsc*dp*ic*isc*ip*
  122. alias:          usb:v046Dp092Ad*dc*dsc*dp*ic*isc*ip*
  123. alias:          usb:v046Dp0928d*dc*dsc*dp*ic*isc*ip*
  124. alias:          usb:v0546p3155d*dc*dsc*dp*ic*isc*ip*
  125. alias:          usb:v10FDp8050d*dc*dsc*dp*ic*isc*ip*
  126. alias:          usb:v0545p808Bd*dc*dsc*dp*ic*isc*ip*
  127. alias:          usb:v0545p8333d*dc*dsc*dp*ic*isc*ip*
  128. alias:          usb:v041Ep403Bd*dc*dsc*dp*ic*isc*ip*
  129. alias:          usb:v055FpC005d*dc*dsc*dp*ic*isc*ip*
  130. alias:          usb:v041Ep4036d*dc*dsc*dp*ic*isc*ip*
  131. alias:          usb:v0733p2221d*dc*dsc*dp*ic*isc*ip*
  132. alias:          usb:v055FpC200d*dc*dsc*dp*ic*isc*ip*
  133. alias:          usb:v0923p010Fd*dc*dsc*dp*ic*isc*ip*
  134. alias:          usb:v046Dp0920d*dc*dsc*dp*ic*isc*ip*
  135. alias:          usb:v046Dp0921d*dc*dsc*dp*ic*isc*ip*
  136. alias:          usb:v08CAp2022d*dc*dsc*dp*ic*isc*ip*
  137. alias:          usb:v0572p0041d*dc*dsc*dp*ic*isc*ip*
  138. alias:          usb:v0AC8p0302d*dc*dsc*dp*ic*isc*ip*
  139. alias:          usb:v055FpC211d*dc*dsc*dp*ic*isc*ip*
  140. alias:          usb:v041Ep403Ad*dc*dsc*dp*ic*isc*ip*
  141. alias:          usb:v0AC8p301Bd*dc*dsc*dp*ic*isc*ip*
  142. alias:          usb:v055FpC540d*dc*dsc*dp*ic*isc*ip*
  143. alias:          usb:v04FCp5330d*dc*dsc*dp*ic*isc*ip*
  144. alias:          usb:v0C45p600Dd*dc*dsc*dp*ic*isc*ip*
  145. alias:          usb:v0C45p6009d*dc*dsc*dp*ic*isc*ip*
  146. alias:          usb:v0C45p6029d*dc*dsc*dp*ic*isc*ip*
  147. alias:          usb:v041Ep401Ed*dc*dsc*dp*ic*isc*ip*
  148. alias:          usb:v0458p700Fd*dc*dsc*dp*ic*isc*ip*
  149. alias:          usb:v0458p700Cd*dc*dsc*dp*ic*isc*ip*
  150. alias:          usb:v0458p7007d*dc*dsc*dp*ic*isc*ip*
  151. alias:          usb:v055FpD003d*dc*dsc*dp*ic*isc*ip*
  152. alias:          usb:v046Dp08A2d*dc*dsc*dp*ic*isc*ip*
  153. alias:          usb:v041Ep4017d*dc*dsc*dp*ic*isc*ip*
  154. alias:          usb:v041Ep401Fd*dc*dsc*dp*ic*isc*ip*
  155. alias:          usb:v0546p3273d*dc*dsc*dp*ic*isc*ip*
  156. alias:          usb:v041Ep4018d*dc*dsc*dp*ic*isc*ip*
  157. alias:          usb:v0734p043Bd*dc*dsc*dp*ic*isc*ip*
  158. alias:          usb:v08CAp2016d*dc*dsc*dp*ic*isc*ip*
  159. alias:          usb:v041Ep401Dd*dc*dsc*dp*ic*isc*ip*
  160. alias:          usb:v0733p1311d*dc*dsc*dp*ic*isc*ip*
  161. alias:          usb:v0C45p6025d*dc*dsc*dp*ic*isc*ip*
  162. alias:          usb:v05DAp1018d*dc*dsc*dp*ic*isc*ip*
  163. alias:          usb:v046Dp0905d*dc*dsc*dp*ic*isc*ip*
  164. alias:          usb:v08CAp2024d*dc*dsc*dp*ic*isc*ip*
  165. alias:          usb:v055FpC360d*dc*dsc*dp*ic*isc*ip*
  166. alias:          usb:v046Dp0900d*dc*dsc*dp*ic*isc*ip*
  167. alias:          usb:v0733p2211d*dc*dsc*dp*ic*isc*ip*
  168. alias:          usb:v055FpC220d*dc*dsc*dp*ic*isc*ip*
  169. alias:          usb:v06E1pA190d*dc*dsc*dp*ic*isc*ip*
  170. alias:          usb:v10FDp7E50d*dc*dsc*dp*ic*isc*ip*
  171. alias:          usb:v046Dp0890d*dc*dsc*dp*ic*isc*ip*
  172. alias:          usb:v0461p0815d*dc*dsc*dp*ic*isc*ip*
  173. alias:          usb:v04A5p300Cd*dc*dsc*dp*ic*isc*ip*
  174. alias:          usb:v04A5p300Ad*dc*dsc*dp*ic*isc*ip*
  175. alias:          usb:v060BpA001d*dc*dsc*dp*ic*isc*ip*
  176. alias:          usb:v041Ep4013d*dc*dsc*dp*ic*isc*ip*
  177. alias:          usb:v055FpC440d*dc*dsc*dp*ic*isc*ip*
  178. alias:          usb:v0AF9p0011d*dc*dsc*dp*ic*isc*ip*
  179. alias:          usb:v04A5p3003d*dc*dsc*dp*ic*isc*ip*
  180. alias:          usb:v046Dp0901d*dc*dsc*dp*ic*isc*ip*
  181. alias:          usb:v046Dp0960d*dc*dsc*dp*ic*isc*ip*
  182. alias:          usb:v04A5p3008d*dc*dsc*dp*ic*isc*ip*
  183. alias:          usb:vABCDpCDEEd*dc*dsc*dp*ic*isc*ip*
  184. alias:          usb:v04FCpFFFFd*dc*dsc*dp*ic*isc*ip*
  185. alias:          usb:v055FpC430d*dc*dsc*dp*ic*isc*ip*
  186. alias:          usb:v04FCp0561d*dc*dsc*dp*ic*isc*ip*
  187. alias:          usb:v0458p7004d*dc*dsc*dp*ic*isc*ip*
  188. alias:          usb:v08CAp2010d*dc*dsc*dp*ic*isc*ip*
  189. alias:          usb:v08CAp0106d*dc*dsc*dp*ic*isc*ip*
  190. alias:          usb:v1776p501Cd*dc*dsc*dp*ic*isc*ip*
  191. alias:          usb:v0AF9p0010d*dc*dsc*dp*ic*isc*ip*
  192. alias:          usb:v08CAp0103d*dc*dsc*dp*ic*isc*ip*
  193. alias:          usb:v052Bp1513d*dc*dsc*dp*ic*isc*ip*
  194. alias:          usb:v055FpC650d*dc*dsc*dp*ic*isc*ip*
  195. alias:          usb:v055FpC530d*dc*dsc*dp*ic*isc*ip*
  196. alias:          usb:v04FCp504Ad*dc*dsc*dp*ic*isc*ip*
  197. alias:          usb:v08CAp2018d*dc*dsc*dp*ic*isc*ip*
  198. alias:          usb:v08CAp0104d*dc*dsc*dp*ic*isc*ip*
  199. alias:          usb:v08CAp2008d*dc*dsc*dp*ic*isc*ip*
  200. alias:          usb:v04FCp504Bd*dc*dsc*dp*ic*isc*ip*
  201. alias:          usb:v040Ap0300d*dc*dsc*dp*ic*isc*ip*
  202. alias:          usb:v0506p00DFd*dc*dsc*dp*ic*isc*ip*
  203. alias:          usb:v8086p0110d*dc*dsc*dp*ic*isc*ip*
  204. alias:          usb:v8086p0630d*dc*dsc*dp*ic*isc*ip*
  205. alias:          usb:v041Ep400Bd*dc*dsc*dp*ic*isc*ip*
  206. alias:          usb:v084Dp0003d*dc*dsc*dp*ic*isc*ip*
  207. alias:          usb:v041Ep400Ad*dc*dsc*dp*ic*isc*ip*
  208. alias:          usb:v055FpC520d*dc*dsc*dp*ic*isc*ip*
  209. alias:          usb:v055FpC420d*dc*dsc*dp*ic*isc*ip*
  210. alias:          usb:v040Ap0002d*dc*dsc*dp*ic*isc*ip*
  211. alias:          usb:v0733p0110d*dc*dsc*dp*ic*isc*ip*
  212. alias:          usb:v0733p0402d*dc*dsc*dp*ic*isc*ip*
  213. alias:          usb:v99FAp8988d*dc*dsc*dp*ic*isc*ip*
  214. alias:          usb:v0733p0401d*dc*dsc*dp*ic*isc*ip*
  215. alias:          usb:v0733p0430d*dc*dsc*dp*ic*isc*ip*
  216. depends:        usbcore,videodev,compat_ioctl32
  217. vermagic:       2.6.24-ARCH SMP preempt mod_unload
  218. parm:           autoexpo:Enable/Disable auto exposure (default=1: enabled) (PC-CAM 600/Zc03xx/spca561a/Etoms Only !!!) (int)
  219. parm:           debug:Debug level: 0=none, 1=init/detection, 2=warning, 3=config/control, 4=function call, 5=max (int)
  220. parm:           force_rgb:Read RGB instead of BGR (int)
  221. parm:           gamma:gamma setting range 0 to 7 3-> gamma=1 (int)
  222. parm:           OffRed:OffRed setting range -128 to 128 (int)
  223. parm:           OffBlue:OffBlue setting range -128 to 128 (int)
  224. parm:           OffGreen:OffGreen setting range -128 to 128 (int)
  225. parm:           GRed:Gain Red setting range 0 to 512 /256  (int)
  226. parm:           GBlue:Gain Blue setting range 0 to 512 /256  (int)
  227. parm:           GGreen:Gain Green setting range 0 to 512 /256  (int)
  228. parm:           compress:Turn on/off compression (not functional yet) (int)
  229. parm:           usbgrabber:Is a usb grabber 0x0733:0x0430 ? (default 1)  (int)
  230. parm:           lightfreq:Light frequency banding filter. Set to 50 or 60 Hz, or 0 for NoFlicker (default=50) Zc03xx only (int)
  231. parm:           force_gamma_id:Forced assigning ID of contrast settings (0=default,1,2,3) Zc03xx only (int)
  232. parm:           force_sensor_id:Forced assigning ID sensor (Zc03xx only). Dangerous, only for experts !!! (int)
复制代码


#lsusb
Bus 007 Device 001: ID 0000:0000  
Bus 005 Device 002: ID 0a5c:2101 Broadcom Corp.
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 003: ID 13ba:0017  
Bus 003 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 003 Device 001: ID 0000:0000  
Bus 006 Device 002: ID 0ac8:c302 Z-Star Microelectronics Corp.
Bus 006 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000

(2)linux-uvc
有/dev/video0

#lsmod|grep uvcvideo
uvcvideo               54916  0
compat_ioctl32          9600  1 uvcvideo
videodev               27648  1 uvcvideo
v4l1_compat            14084  2 uvcvideo,videodev
v4l2_common            18816  3 uvcvideo,compat_ioctl32,videodev
usbcore               148272  6 hci_usb,uvcvideo,usbhid,ehci_hcd,uhci_hcd

#modinfo uvcvideo
filename:       /lib/modules/2.6.24-ARCH/kernel/drivers/media/video/usbvideo/uvcvideo.ko
license:        GPL
description:    USB Video Class driver
author:         Laurent Pinchart <laurent.pinchart@skynet.be>
alias:          usb:v*p*d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v5986p0200d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v5986p0102d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v5986p0100d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v19ABp1000d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v18CDpCAFEd*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v174Fp5212d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v0E8Dp0004d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v090CpB371d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v05ACp8501d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v046Dp08C7d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v046Dp08C6d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v046Dp08C5d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v046Dp08C3d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v046Dp08C2d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v046Dp08C1d*dc*dsc*dp*icFFisc01ip00*
alias:          usb:v045Ep00F8d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v041Ep4057d*dc*dsc*dp*ic0Eisc01ip00*
alias:          usb:v0402p5606d*dc*dsc*dp*ic0Eisc01ip00*
depends:        usbcore,videodev,v4l2-common,v4l1-compat,compat_ioctl32
vermagic:       2.6.24-ARCH SMP preempt mod_unload
parm:           trace:uint

#camE
camE: camE 1.9 - (c) 1999, 2000 Gerd Knorr, Tom Gilbert
camE: grabber config: size 320x240, input 0, norm 0, jpeg quality 75
can't load font arial/8
can't load font arial/8
# No supported palette found, please report your device to the author
回复

使用道具 举报

matri
发表于 2008-3-2 09:31:24 | 显示全部楼层
dmesg呢？
回复 支持 反对

使用道具 举报

发表于 2008-3-2 22:43:12 | 显示全部楼层
wiki上有么？linux上使用摄像头目前我还没有这个打算。。
回复 支持 反对

使用道具 举报

kenzhong
 楼主| 发表于 2008-3-3 16:25:59 | 显示全部楼层
To matri:

@uvcvideo
#dmesg|grep uvcvideo
uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
usbcore: registered new interface driver uvcvideo

#dmesg|grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usb usb5: configuration #1 chosen from 1 choice
usb usb6: configuration #1 chosen from 1 choice
usb usb7: configuration #1 chosen from 1 choice
sda: sda1 sda2 sda3 sda4 <<6>usb 6-2: new high speed USB device using ehci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input3
input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2
input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input4
input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver uvcvideo
usbcore: registered new interface driver hci_usb

for all dmesg information:
  1. #dmesg
  2. Linux version 2.6.24-ARCH (root@artin) (gcc version 4.2.3) #1 SMP PREEMPT Tue Feb 26 23:47:57 CET 2008
  3. Command line: root=/dev/sda5 resume=/dev/sda2 ro vga=773
  4. BIOS-provided physical RAM map:
  5. BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  6. BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  7. BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
  8. BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  9. BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
  10. BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
  11. BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
  12. BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  13. BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  14. BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  15. BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  16. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  17. BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  18. Entering add_active_range(0, 0, 159) 0 entries of 256 used
  19. Entering add_active_range(0, 256, 523984) 1 entries of 256 used
  20. end_pfn_map = 1048576
  21. DMI present.
  22. ACPI: RSDP 000F7900, 0024 (r2 PTLTD )
  23. ACPI: XSDT 7FED75CD, 009C (r1 SECCSD LH43STAR  6040000  LTP        0)
  24. ACPI: FACP 7FEDFB9A, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
  25. ACPI: DSDT 7FED9545, 65E1 (r2 INTEL  CRESTLNE  6040000 INTL 20050624)
  26. ACPI: FACS 7FEE2FC0, 0040
  27. ACPI: APIC 7FEDFC8E, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  28. ACPI: HPET 7FEDFCF6, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  29. ACPI: MCFG 7FEDFD2E, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  30. ACPI: TCPA 7FEDFD6A, 0032 (r1 Intel   CRESTLN  6040000          5A52)
  31. ACPI: TMOR 7FEDFD9C, 0026 (r1 PTLTD            6040000 PTL         3)
  32. ACPI: APIC 7FEDFDC2, 0068 (r1 PTLTD           APIC    6040000  LTP        0)
  33. ACPI: HPET 7FEDFE2A, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
  34. ACPI: BOOT 7FEDFE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
  35. ACPI: SLIC 7FEDFE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
  36. ACPI: SSDT 7FED8EF6, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
  37. ACPI: SSDT 7FED8864, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
  38. ACPI: SSDT 7FED7BF5, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
  39. ACPI: SSDT 7FED7B4F, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
  40. ACPI: SSDT 7FED7669, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
  41. ACPI: BIOS bug: multiple APIC/MADT found, using 0
  42. ACPI: If "acpi_apic_instance=2" works better, notify [email]linux-acpi@vger.kernel.org[/email]
  43. ACPI: DMI detected: Samsung
  44. Entering add_active_range(0, 0, 159) 0 entries of 256 used
  45. Entering add_active_range(0, 256, 523984) 1 entries of 256 used
  46. Zone PFN ranges:
  47.   DMA             0 ->     4096
  48.   DMA32        4096 ->  1048576
  49.   Normal    1048576 ->  1048576
  50. Movable zone start PFN for each node
  51. early_node_map[2] active PFN ranges
  52.     0:        0 ->      159
  53.     0:      256 ->   523984
  54. On node 0 totalpages: 523887
  55.   DMA zone: 56 pages used for memmap
  56.   DMA zone: 1206 pages reserved
  57.   DMA zone: 2737 pages, LIFO batch:0
  58.   DMA32 zone: 7107 pages used for memmap
  59.   DMA32 zone: 512781 pages, LIFO batch:31
  60.   Normal zone: 0 pages used for memmap
  61.   Movable zone: 0 pages used for memmap
  62. ACPI: PM-Timer IO Port: 0x1008
  63. ACPI: Local APIC address 0xfee00000
  64. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  65. Processor #0 (Bootup-CPU)
  66. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  67. Processor #1
  68. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  69. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  70. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  71. IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
  72. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  73. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  74. ACPI: IRQ0 used by override.
  75. ACPI: IRQ2 used by override.
  76. ACPI: IRQ9 used by override.
  77. Setting APIC routing to flat
  78. ACPI: HPET id: 0x8086a201 base: 0xfed00000
  79. Using ACPI (MADT) for SMP configuration information
  80. swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  81. swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
  82. swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
  83. swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
  84. swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
  85. Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
  86. SMP: Allowing 2 CPUs, 0 hotplug CPUs
  87. PERCPU: Allocating 33200 bytes of per cpu data
  88. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515518
  89. Kernel command line: root=/dev/sda5 resume=/dev/sda2 ro vga=773
  90. Initializing CPU#0
  91. PID hash table entries: 4096 (order: 12, 32768 bytes)
  92. Extended CMOS year: 2000
  93. hpet clockevent registered
  94. TSC calibrated against HPET
  95. Marking TSC unstable due to TSCs unsynchronized
  96. time.c: Detected 1994.981 MHz processor.
  97. Console: colour dummy device 80x25
  98. console [tty0] enabled
  99. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  100. Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  101. Checking aperture...
  102. Calgary: detecting Calgary via BIOS EBDA area
  103. Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  104. Memory: 2056608k/2095936k available (2821k kernel code, 38704k reserved, 1097k data, 264k init)
  105. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  106. Calibrating delay using timer specific routine.. 3995.86 BogoMIPS (lpj=6655789)
  107. Security Framework initialized
  108. Capability LSM initialized
  109. Mount-cache hash table entries: 256
  110. CPU: L1 I cache: 32K, L1 D cache: 32K
  111. CPU: L2 cache: 4096K
  112. using mwait in idle threads.
  113. CPU: Physical Processor ID: 0
  114. CPU: Processor Core ID: 0
  115. CPU0: Thermal monitoring enabled (TM2)
  116. SMP alternatives: switching to UP code
  117. Early unpacking initramfs... done
  118. ACPI: Core revision 20070126
  119. ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  120. Using local APIC timer interrupts.
  121. APIC timer calibration result 12468623
  122. Detected 12.468 MHz APIC timer.
  123. SMP alternatives: switching to SMP code
  124. Booting processor 1/2 APIC 0x1
  125. Initializing CPU#1
  126. Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649993)
  127. CPU: L1 I cache: 32K, L1 D cache: 32K
  128. CPU: L2 cache: 4096K
  129. CPU: Physical Processor ID: 0
  130. CPU: Processor Core ID: 1
  131. CPU1: Thermal monitoring enabled (TM2)
  132. Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
  133. Brought up 2 CPUs
  134. net_namespace: 120 bytes
  135. NET: Registered protocol family 16
  136. ACPI: bus type pci registered
  137. PCI: Using MMCONFIG at e0000000 - efffffff
  138. ACPI: EC: Look up EC in DSDT
  139. ACPI: BIOS _OSI(Linux) query ignored via DMI
  140. ACPI: Interpreter enabled
  141. ACPI: (supports S0 S3 S4 S5)
  142. ACPI: Using IOAPIC for interrupt routing
  143. ACPI: EC: non-query interrupt received, switching to interrupt mode
  144. ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  145. ACPI: EC: driver started in interrupt mode
  146. ACPI: PCI Root Bridge [PCI0] (0000:00)
  147. PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
  148. PCI quirk: region 1180-11bf claimed by ICH6 GPIO
  149. PCI: Transparent bridge - 0000:00:1e.0
  150. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  151. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
  152. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  153. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  154. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
  155. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  156. ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
  157. ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
  158. ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
  159. ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
  160. ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
  161. ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
  162. ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
  163. ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
  164. ACPI: Power Resource [FN00] (off)
  165. Linux Plug and Play Support v0.97 (c) Adam Belay
  166. pnp: PnP ACPI init
  167. ACPI: bus type pnp registered
  168. pnp: PnP ACPI: found 10 devices
  169. ACPI: ACPI bus type pnp unregistered
  170. SCSI subsystem initialized
  171. PCI: Using ACPI for IRQ routing
  172. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  173. NetLabel: Initializing
  174. NetLabel:  domain hash size = 128
  175. NetLabel:  protocols = UNLABELED CIPSOv4
  176. NetLabel:  unlabeled traffic allowed by default
  177. PCI-GART: No AMD northbridge found.
  178. Time: hpet clocksource has been installed.
  179. Switched to high resolution mode on CPU 0
  180. Switched to high resolution mode on CPU 1
  181. system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
  182. system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
  183. system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
  184. system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
  185. system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
  186. system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
  187. system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
  188. system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
  189. system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
  190. system 00:06: ioport range 0x680-0x69f has been reserved
  191. system 00:06: ioport range 0x6b0-0x6ff has been reserved
  192. system 00:06: ioport range 0x800-0x80f has been reserved
  193. system 00:06: ioport range 0x900-0x90f has been reserved
  194. system 00:06: ioport range 0x1000-0x107f has been reserved
  195. system 00:06: ioport range 0x1180-0x11bf has been reserved
  196. system 00:06: ioport range 0x1640-0x164f has been reserved
  197. system 00:06: ioport range 0xfe00-0xfe00 has been reserved
  198. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
  199. PCI: Bridge: 0000:00:01.0
  200.   IO window: 2000-2fff
  201.   MEM window: cc000000-ceffffff
  202.   PREFETCH window: d0000000-dfffffff
  203. PCI: Bridge: 0000:00:1c.0
  204.   IO window: disabled.
  205.   MEM window: disabled.
  206.   PREFETCH window: disabled.
  207. PCI: Bridge: 0000:00:1c.1
  208.   IO window: disabled.
  209.   MEM window: f0300000-f03fffff
  210.   PREFETCH window: disabled.
  211. PCI: Bridge: 0000:00:1c.3
  212.   IO window: 3000-3fff
  213.   MEM window: f0200000-f02fffff
  214.   PREFETCH window: 88000000-880fffff
  215. PCI: Bus 6, cardbus bridge: 0000:05:09.0
  216.   IO window: 00001400-000014ff
  217.   IO window: 00004000-000040ff
  218.   PREFETCH window: 8c000000-8fffffff
  219.   MEM window: 90000000-93ffffff
  220. PCI: Bridge: 0000:00:1e.0
  221.   IO window: disabled.
  222.   MEM window: f0400000-f04fffff
  223.   PREFETCH window: disabled.
  224. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  225. PCI: Setting latency timer of device 0000:00:01.0 to 64
  226. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
  227. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  228. ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
  229. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  230. ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
  231. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  232. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  233. ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 16 (level, low) -> IRQ 16
  234. NET: Registered protocol family 2
  235. IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  236. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  237. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  238. TCP: Hash tables configured (established 262144 bind 65536)
  239. TCP reno registered
  240. checking if image is initramfs... it is
  241. Freeing initrd memory: 1967k freed
  242. Simple Boot Flag at 0x36 set to 0x1
  243. VFS: Disk quotas dquot_6.5.1
  244. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  245. Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).
  246. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  247. io scheduler noop registered
  248. io scheduler anticipatory registered
  249. io scheduler deadline registered
  250. io scheduler cfq registered (default)
  251. Boot video device is 0000:01:00.0
  252. PCI: Setting latency timer of device 0000:00:01.0 to 64
  253. assign_interrupt_mode Found MSI capability
  254. Allocate Port Service[0000:00:01.0:pcie00]
  255. Allocate Port Service[0000:00:01.0:pcie02]
  256. Allocate Port Service[0000:00:01.0:pcie03]
  257. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  258. assign_interrupt_mode Found MSI capability
  259. Allocate Port Service[0000:00:1c.0:pcie00]
  260. Allocate Port Service[0000:00:1c.0:pcie02]
  261. Allocate Port Service[0000:00:1c.0:pcie03]
  262. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  263. assign_interrupt_mode Found MSI capability
  264. Allocate Port Service[0000:00:1c.1:pcie00]
  265. Allocate Port Service[0000:00:1c.1:pcie02]
  266. Allocate Port Service[0000:00:1c.1:pcie03]
  267. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  268. assign_interrupt_mode Found MSI capability
  269. Allocate Port Service[0000:00:1c.3:pcie00]
  270. Allocate Port Service[0000:00:1c.3:pcie02]
  271. Allocate Port Service[0000:00:1c.3:pcie03]
  272. vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 1536k, total 14336k
  273. vesafb: mode is 1024x768x8, linelength=1024, pages=3
  274. vesafb: scrolling: redraw
  275. vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
  276. Console: switching to colour frame buffer device 128x48
  277. fb0: VESA VGA frame buffer device
  278. Real Time Clock Driver v1.12ac
  279. Linux agpgart interface v0.102
  280. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  281. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  282. loop: module loaded
  283. input: Macintosh mouse button emulation as /devices/virtual/input/input0
  284. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  285. i8042.c: Detected active multiplexing controller, rev 1.1.
  286. serio: i8042 KBD port at 0x60,0x64 irq 1
  287. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  288. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  289. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  290. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  291. mice: PS/2 mouse device common for all mice
  292. cpuidle: using governor ladder
  293. cpuidle: using governor menu
  294. TCP cubic registered
  295. NET: Registered protocol family 1
  296. NET: Registered protocol family 17
  297. RPC: Registered udp transport module.
  298. RPC: Registered tcp transport module.
  299. Freeing unused kernel memory: 264k freed
  300. libata version 3.00 loaded.
  301. ata_piix 0000:00:1f.2: version 2.12
  302. ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
  303. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  304. ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
  305. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  306. scsi0 : ata_piix
  307. scsi1 : ata_piix
  308. ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
  309. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
  310. ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
  311. ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  312. ata1.00: configured for UDMA/100
  313. ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC03, max UDMA/33
  314. ata2.00: configured for UDMA/33
  315. scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
  316. scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC03 PQ: 0 ANSI: 5
  317. usbcore: registered new interface driver usbfs
  318. usbcore: registered new interface driver hub
  319. usbcore: registered new device driver usb
  320. USB Universal Host Controller Interface driver v3.0
  321. ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  322. PCI: Setting latency timer of device 0000:00:1a.0 to 64
  323. uhci_hcd 0000:00:1a.0: UHCI Host Controller
  324. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  325. uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
  326. usb usb1: configuration #1 chosen from 1 choice
  327. hub 1-0:1.0: USB hub found
  328. hub 1-0:1.0: 2 ports detected
  329. ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
  330. PCI: Setting latency timer of device 0000:00:1a.1 to 64
  331. uhci_hcd 0000:00:1a.1: UHCI Host Controller
  332. uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
  333. uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
  334. usb usb2: configuration #1 chosen from 1 choice
  335. hub 2-0:1.0: USB hub found
  336. hub 2-0:1.0: 2 ports detected
  337. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17ks
  338. iwl3945: Copyright(c) 2003-2007 Intel Corporation
  339. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
  340. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  341. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  342. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
  343. uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
  344. usb usb3: configuration #1 chosen from 1 choice
  345. hub 3-0:1.0: USB hub found
  346. hub 3-0:1.0: 2 ports detected
  347. ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
  348. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  349. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  350. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
  351. uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
  352. usb usb4: configuration #1 chosen from 1 choice
  353. hub 4-0:1.0: USB hub found
  354. hub 4-0:1.0: 2 ports detected
  355. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  356. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  357. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  358. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
  359. uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
  360. usb usb5: configuration #1 chosen from 1 choice
  361. hub 5-0:1.0: USB hub found
  362. hub 5-0:1.0: 2 ports detected
  363. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
  364. PCI: Setting latency timer of device 0000:00:1a.7 to 64
  365. ehci_hcd 0000:00:1a.7: EHCI Host Controller
  366. ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
  367. ehci_hcd 0000:00:1a.7: debug port 1
  368. PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  369. ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504000
  370. ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  371. usb usb6: configuration #1 chosen from 1 choice
  372. hub 6-0:1.0: USB hub found
  373. hub 6-0:1.0: 4 ports detected
  374. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
  375. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  376. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  377. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
  378. ehci_hcd 0000:00:1d.7: debug port 1
  379. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  380. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
  381. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  382. usb usb7: configuration #1 chosen from 1 choice
  383. hub 7-0:1.0: USB hub found
  384. hub 7-0:1.0: 6 ports detected
  385. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
  386. PCI: Setting latency timer of device 0000:03:00.0 to 64
  387. iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
  388. iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2
  389. iwl3945: Could not read microcode: -2
  390. ACPI: PCI interrupt for device 0000:03:00.0 disabled
  391. iwl3945: probe of 0000:03:00.0 failed with error -2
  392. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
  393. PCI: Setting latency timer of device 0000:04:00.0 to 64
  394. sky2 0000:04:00.0: v1.20 addr 0xf0200000 irq 19 Yukon-EC Ultra (0xb4) rev 3
  395. sky2 eth0: addr 00:13:77:38:fd:c9
  396. Driver 'sd' needs updating - please use bus_type methods
  397. sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  398. sd 0:0:0:0: [sda] Write Protect is off
  399. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  400. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  401. sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  402. sd 0:0:0:0: [sda] Write Protect is off
  403. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  404. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  405. sda: sda1 sda2 sda3 sda4 <<6>usb 6-2: new high speed USB device using ehci_hcd and address 2
  406. Driver 'sr' needs updating - please use bus_type methods
  407. sda5 sda6 >
  408. sd 0:0:0:0: [sda] Attached SCSI disk
  409. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  410. Uniform CD-ROM driver Revision: 3.20
  411. sr 1:0:0:0: Attached scsi CD-ROM sr0
  412. usb 6-2: configuration #1 chosen from 1 choice
  413. usb 3-1: new low speed USB device using uhci_hcd and address 2
  414. usb 3-1: configuration #1 chosen from 1 choice
  415. usb 3-2: new low speed USB device using uhci_hcd and address 3
  416. usb 3-2: configuration #1 chosen from 1 choice
  417. usbcore: registered new interface driver hiddev
  418. usb 5-2: new full speed USB device using uhci_hcd and address 2
  419. usb 5-2: configuration #1 chosen from 1 choice
  420. input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
  421. input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
  422. input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input3
  423. input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2
  424. input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input4
  425. input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2
  426. usbcore: registered new interface driver usbhid
  427. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  428. Attempting manual resume
  429. ReiserFS: sda5: found reiserfs format "3.6" with standard journal
  430. ReiserFS: sda5: using ordered data mode
  431. ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  432. ReiserFS: sda5: checking transaction log (sda5)
  433. ReiserFS: sda5: Using r5 hash to sort names
  434. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  435. PCI: Setting latency timer of device 0000:00:1b.0 to 64
  436. hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
  437. snd_pcm_oss: Unknown symbol snd_verbose_printk
  438. snd_seq_oss: Unknown symbol snd_verbose_printk
  439. snd_pcm_oss: Unknown symbol snd_verbose_printk
  440. snd_seq_oss: Unknown symbol snd_verbose_printk
  441. si3054: cannot initialize. EXT MID = 0000
  442. nvidia: module license 'NVIDIA' taints kernel.
  443. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  444. PCI: Setting latency timer of device 0000:01:00.0 to 64
  445. NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.09  Fri Jan 11 14:04:37 PST 2008
  446. ACPI: AC Adapter [ADP1] (on-line)
  447. ACPI: Battery Slot [BAT1] (battery present)
  448. input: Power Button (FF) as /devices/virtual/input/input5
  449. ACPI: Power Button (FF) [PWRF]
  450. input: Lid Switch as /devices/virtual/input/input6
  451. ACPI: Lid Switch [LID0]
  452. input: Power Button (CM) as /devices/virtual/input/input7
  453. ACPI: Power Button (CM) [PWRB]
  454. input: Sleep Button (CM) as /devices/virtual/input/input8
  455. ACPI: Sleep Button (CM) [SLPB]
  456. ACPI: Transitioning device [FAN0] to D3
  457. ACPI: Transitioning device [FAN0] to D3
  458. ACPI: Fan [FAN0] (off)
  459. Linux video capture interface: v2.00
  460. uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
  461. usbcore: registered new interface driver uvcvideo
  462. USB Video Class driver (SVN r184)
  463. ACPI: SSDT 7FED8474, 0328 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
  464. ACPI: SSDT 7FED7E54, 059B (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
  465. Monitor-Mwait will be used to enter C-1 state
  466. Monitor-Mwait will be used to enter C-2 state
  467. ACPI: CPU0 (power states: C1[C1] C2[C2])
  468. ACPI: Processor [CPU0] (supports 8 throttling states)
  469. ACPI: SSDT 7FED879C, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
  470. ACPI: SSDT 7FED83EF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
  471. ACPI: CPU1 (power states: C1[C1] C2[C2])
  472. ACPI: Processor [CPU1] (supports 8 throttling states)
  473. ACPI: Thermal Zone [TZ00] (56 C)
  474. ACPI: Thermal Zone [TZ01] (56 C)
  475. ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFFE [20070126]
  476. Pid: 3471, comm: modprobe Tainted: P        2.6.24-ARCH #1

  478. Call Trace:
  479. [<ffffffff803b38fa>] acpi_ut_update_ref_count+0x50/0x9d
  480. [<ffffffff803b3da5>] acpi_format_exception+0x2c/0x35
  481. [<ffffffff803b2b3f>] acpi_ut_exception+0x25/0x8c
  482. [<ffffffff8039e31c>] acpi_evaluate_integer+0xb6/0xc7
  483. [<ffffffff88aa6c2b>] :video:acpi_video_bus_add+0xc3d/0xc53
  484. [<ffffffff802ebb90>] sysfs_ilookup_test+0x0/0x10
  485. [<ffffffff802ebe39>] sysfs_find_dirent+0x29/0x40
  486. [<ffffffff803b6e0a>] acpi_device_probe+0x43/0x91
  487. [<ffffffff803e825c>] driver_probe_device+0x9c/0x1b0
  488. [<ffffffff803e8450>] __driver_attach+0x0/0xb0
  489. [<ffffffff803e84f5>] __driver_attach+0xa5/0xb0
  490. [<ffffffff803e74cd>] bus_for_each_dev+0x4d/0x80
  491. [<ffffffff803e78dc>] bus_add_driver+0xac/0x220
  492. [<ffffffff8806a03c>] :video:acpi_video_init+0x3c/0x5e
  493. [<ffffffff8026316e>] sys_init_module+0x18e/0x1a30
  494. [<ffffffff8020c49e>] system_call+0x7e/0x83

  496. ACPI Exception (video-1708): UNKNOWN_STATUS_CODE, Cant attach device [20070126]
  497. input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9
  498. sd 0:0:0:0: Attached scsi generic sg0 type 0
  499. sr 1:0:0:0: Attached scsi generic sg1 type 5
  500. ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
  501. input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
  502. ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  503. Bluetooth: Core ver 2.11
  504. NET: Registered protocol family 31
  505. Bluetooth: HCI device and connection manager initialized
  506. Bluetooth: HCI socket layer initialized
  507. Bluetooth: HCI USB driver ver 2.9
  508. usbcore: registered new interface driver hci_usb
  509. ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
  510. input: PC Speaker as /devices/platform/pcspkr/input/input11
  511. rtc_cmos: probe of 00:07 failed with error -16
  512. ricoh-mmc: Ricoh MMC Controller disabling driver
  513. ricoh-mmc: Copyright(c) Philip Langdale
  514. ricoh-mmc: Ricoh MMC controller found at 0000:05:09.2 [1180:0843] (rev 0)
  515. ricoh-mmc: Main firewire function not found. Cannot disable controller.
  516. sdhci: Secure Digital Host Controller Interface driver
  517. sdhci: Copyright(c) Pierre Ossman
  518. sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 18)
  519. ACPI: PCI Interrupt 0000:05:09.1[C] -> GSI 18 (level, low) -> IRQ 18
  520. sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
  521. PCI: Setting latency timer of device 0000:05:09.1 to 64
  522. mmc0: SDHCI at 0xf0401000 irq 18 DMA
  523. Yenta: CardBus bridge found at 0000:05:09.0 [144d:c031]
  524. Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
  525. Socket status: 30000006
  526. Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
  527. pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
  528. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
  529. snd_pcm_oss: Unknown symbol snd_verbose_printk
  530. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
  531. snd_pcm_oss: Unknown symbol snd_verbose_printk
  532. snd_seq_oss: Unknown symbol snd_verbose_printk
  533. snd_seq_oss: Unknown symbol snd_verbose_printk
  534. fuse init (API version 7.9)
  535. Adding 497972k swap on /dev/sda6.  Priority:-1 extents:1 across:497972k
  536. sky2 eth0: enabling interface
  537. sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
  538. NET: Registered protocol family 10
  539. lo: Disabled Privacy Extensions
复制代码


@gspcav
#dmesg|grep gspca
usbcore: registered new interface driver gspca
/home/tobias/Arch/devel/2.6.24/extra/gspcav1/src/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered

#dmesg|grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
sda5<6>usb usb3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
usb usb5: configuration #1 chosen from 1 choice
usb usb6: configuration #1 chosen from 1 choice
usb usb7: configuration #1 chosen from 1 choice
usb 6-2: new high speed USB device using ehci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input3
input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2
input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input4
input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver gspca
usbcore: registered new interface driver hci_usb

for all dmesg information:

  2. dmesg
  3. Linux version 2.6.24-ARCH (root@artin) (gcc version 4.2.3) #1 SMP PREEMPT Tue Feb 26 23:47:57 CET 2008
  4. Command line: root=/dev/sda5 resume=/dev/sda2 ro vga=773
  5. BIOS-provided physical RAM map:
  6. BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  7. BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  8. BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
  9. BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  10. BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
  11. BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
  12. BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
  13. BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  14. BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  15. BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  16. BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  17. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  18. BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  19. Entering add_active_range(0, 0, 159) 0 entries of 256 used
  20. Entering add_active_range(0, 256, 523984) 1 entries of 256 used
  21. end_pfn_map = 1048576
  22. DMI present.
  23. ACPI: RSDP 000F7900, 0024 (r2 PTLTD )
  24. ACPI: XSDT 7FED75CD, 009C (r1 SECCSD LH43STAR  6040000  LTP        0)
  25. ACPI: FACP 7FEDFB9A, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
  26. ACPI: DSDT 7FED9545, 65E1 (r2 INTEL  CRESTLNE  6040000 INTL 20050624)
  27. ACPI: FACS 7FEE2FC0, 0040
  28. ACPI: APIC 7FEDFC8E, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  29. ACPI: HPET 7FEDFCF6, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  30. ACPI: MCFG 7FEDFD2E, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
  31. ACPI: TCPA 7FEDFD6A, 0032 (r1 Intel   CRESTLN  6040000          5A52)
  32. ACPI: TMOR 7FEDFD9C, 0026 (r1 PTLTD            6040000 PTL         3)
  33. ACPI: APIC 7FEDFDC2, 0068 (r1 PTLTD           APIC    6040000  LTP        0)
  34. ACPI: HPET 7FEDFE2A, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
  35. ACPI: BOOT 7FEDFE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
  36. ACPI: SLIC 7FEDFE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
  37. ACPI: SSDT 7FED8EF6, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
  38. ACPI: SSDT 7FED8864, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
  39. ACPI: SSDT 7FED7BF5, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
  40. ACPI: SSDT 7FED7B4F, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
  41. ACPI: SSDT 7FED7669, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
  42. ACPI: BIOS bug: multiple APIC/MADT found, using 0
  43. ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
  44. ACPI: DMI detected: Samsung
  45. Entering add_active_range(0, 0, 159) 0 entries of 256 used
  46. Entering add_active_range(0, 256, 523984) 1 entries of 256 used
  47. Zone PFN ranges:
  48.   DMA             0 ->     4096
  49.   DMA32        4096 ->  1048576
  50.   Normal    1048576 ->  1048576
  51. Movable zone start PFN for each node
  52. early_node_map[2] active PFN ranges
  53.     0:        0 ->      159
  54.     0:      256 ->   523984
  55. On node 0 totalpages: 523887
  56.   DMA zone: 56 pages used for memmap
  57.   DMA zone: 1206 pages reserved
  58.   DMA zone: 2737 pages, LIFO batch:0
  59.   DMA32 zone: 7107 pages used for memmap
  60.   DMA32 zone: 512781 pages, LIFO batch:31
  61.   Normal zone: 0 pages used for memmap
  62.   Movable zone: 0 pages used for memmap
  63. ACPI: PM-Timer IO Port: 0x1008
  64. ACPI: Local APIC address 0xfee00000
  65. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  66. Processor #0 (Bootup-CPU)
  67. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  68. Processor #1
  69. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  70. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  71. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  72. IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
  73. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  74. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  75. ACPI: IRQ0 used by override.
  76. ACPI: IRQ2 used by override.
  77. ACPI: IRQ9 used by override.
  78. Setting APIC routing to flat
  79. ACPI: HPET id: 0x8086a201 base: 0xfed00000
  80. Using ACPI (MADT) for SMP configuration information
  81. swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  82. swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
  83. swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
  84. swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
  85. swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
  86. Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
  87. SMP: Allowing 2 CPUs, 0 hotplug CPUs
  88. PERCPU: Allocating 33200 bytes of per cpu data
  89. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515518
  90. Kernel command line: root=/dev/sda5 resume=/dev/sda2 ro vga=773
  91. Initializing CPU#0
  92. PID hash table entries: 4096 (order: 12, 32768 bytes)
  93. Extended CMOS year: 2000
  94. hpet clockevent registered
  95. TSC calibrated against HPET
  96. Marking TSC unstable due to TSCs unsynchronized
  97. time.c: Detected 1994.980 MHz processor.
  98. Console: colour dummy device 80x25
  99. console [tty0] enabled
  100. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  101. Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  102. Checking aperture...
  103. Calgary: detecting Calgary via BIOS EBDA area
  104. Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  105. Memory: 2056608k/2095936k available (2821k kernel code, 38704k reserved, 1097k data, 264k init)
  106. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  107. Calibrating delay using timer specific routine.. 3995.83 BogoMIPS (lpj=6655739)
  108. Security Framework initialized
  109. Capability LSM initialized
  110. Mount-cache hash table entries: 256
  111. CPU: L1 I cache: 32K, L1 D cache: 32K
  112. CPU: L2 cache: 4096K
  113. using mwait in idle threads.
  114. CPU: Physical Processor ID: 0
  115. CPU: Processor Core ID: 0
  116. CPU0: Thermal monitoring enabled (TM2)
  117. SMP alternatives: switching to UP code
  118. Early unpacking initramfs... done
  119. ACPI: Core revision 20070126
  120. ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  121. Using local APIC timer interrupts.
  122. APIC timer calibration result 12468623
  123. Detected 12.468 MHz APIC timer.
  124. SMP alternatives: switching to SMP code
  125. Booting processor 1/2 APIC 0x1
  126. Initializing CPU#1
  127. Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649990)
  128. CPU: L1 I cache: 32K, L1 D cache: 32K
  129. CPU: L2 cache: 4096K
  130. CPU: Physical Processor ID: 0
  131. CPU: Processor Core ID: 1
  132. CPU1: Thermal monitoring enabled (TM2)
  133. Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
  134. Brought up 2 CPUs
  135. net_namespace: 120 bytes
  136. NET: Registered protocol family 16
  137. ACPI: bus type pci registered
  138. PCI: Using MMCONFIG at e0000000 - efffffff
  139. ACPI: EC: Look up EC in DSDT
  140. ACPI: BIOS _OSI(Linux) query ignored via DMI
  141. ACPI: Interpreter enabled
  142. ACPI: (supports S0 S3 S4 S5)
  143. ACPI: Using IOAPIC for interrupt routing
  144. ACPI: EC: non-query interrupt received, switching to interrupt mode
  145. ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  146. ACPI: EC: driver started in interrupt mode
  147. ACPI: PCI Root Bridge [PCI0] (0000:00)
  148. PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
  149. PCI quirk: region 1180-11bf claimed by ICH6 GPIO
  150. PCI: Transparent bridge - 0000:00:1e.0
  151. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  152. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
  153. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  154. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  155. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
  156. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  157. ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
  158. ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
  159. ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
  160. ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
  161. ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
  162. ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
  163. ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
  164. ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
  165. ACPI: Power Resource [FN00] (off)
  166. Linux Plug and Play Support v0.97 (c) Adam Belay
  167. pnp: PnP ACPI init
  168. ACPI: bus type pnp registered
  169. pnp: PnP ACPI: found 10 devices
  170. ACPI: ACPI bus type pnp unregistered
  171. SCSI subsystem initialized
  172. PCI: Using ACPI for IRQ routing
  173. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  174. NetLabel: Initializing
  175. NetLabel:  domain hash size = 128
  176. NetLabel:  protocols = UNLABELED CIPSOv4
  177. NetLabel:  unlabeled traffic allowed by default
  178. PCI-GART: No AMD northbridge found.
  179. Time: hpet clocksource has been installed.
  180. Switched to high resolution mode on CPU 0
  181. Switched to high resolution mode on CPU 1
  182. system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
  183. system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
  184. system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
  185. system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
  186. system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
  187. system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
  188. system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
  189. system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
  190. system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
  191. system 00:06: ioport range 0x680-0x69f has been reserved
  192. system 00:06: ioport range 0x6b0-0x6ff has been reserved
  193. system 00:06: ioport range 0x800-0x80f has been reserved
  194. system 00:06: ioport range 0x900-0x90f has been reserved
  195. system 00:06: ioport range 0x1000-0x107f has been reserved
  196. system 00:06: ioport range 0x1180-0x11bf has been reserved
  197. system 00:06: ioport range 0x1640-0x164f has been reserved
  198. system 00:06: ioport range 0xfe00-0xfe00 has been reserved
  199. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
  200. PCI: Bridge: 0000:00:01.0
  201.   IO window: 2000-2fff
  202.   MEM window: cc000000-ceffffff
  203.   PREFETCH window: d0000000-dfffffff
  204. PCI: Bridge: 0000:00:1c.0
  205.   IO window: disabled.
  206.   MEM window: disabled.
  207.   PREFETCH window: disabled.
  208. PCI: Bridge: 0000:00:1c.1
  209.   IO window: disabled.
  210.   MEM window: f0300000-f03fffff
  211.   PREFETCH window: disabled.
  212. PCI: Bridge: 0000:00:1c.3
  213.   IO window: 3000-3fff
  214.   MEM window: f0200000-f02fffff
  215.   PREFETCH window: 88000000-880fffff
  216. PCI: Bus 6, cardbus bridge: 0000:05:09.0
  217.   IO window: 00001400-000014ff
  218.   IO window: 00004000-000040ff
  219.   PREFETCH window: 8c000000-8fffffff
  220.   MEM window: 90000000-93ffffff
  221. PCI: Bridge: 0000:00:1e.0
  222.   IO window: disabled.
  223.   MEM window: f0400000-f04fffff
  224.   PREFETCH window: disabled.
  225. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  226. PCI: Setting latency timer of device 0000:00:01.0 to 64
  227. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
  228. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  229. ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
  230. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  231. ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
  232. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  233. PCI: Setting latency timer of device 0000:00:1e.0 to 64
  234. ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 16 (level, low) -> IRQ 16
  235. NET: Registered protocol family 2
  236. IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  237. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  238. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  239. TCP: Hash tables configured (established 262144 bind 65536)
  240. TCP reno registered
  241. checking if image is initramfs... it is
  242. Freeing initrd memory: 1967k freed
  243. Simple Boot Flag at 0x36 set to 0x1
  244. VFS: Disk quotas dquot_6.5.1
  245. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  246. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  247. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  248. io scheduler noop registered
  249. io scheduler anticipatory registered
  250. io scheduler deadline registered
  251. io scheduler cfq registered (default)
  252. Boot video device is 0000:01:00.0
  253. PCI: Setting latency timer of device 0000:00:01.0 to 64
  254. assign_interrupt_mode Found MSI capability
  255. Allocate Port Service[0000:00:01.0:pcie00]
  256. Allocate Port Service[0000:00:01.0:pcie02]
  257. Allocate Port Service[0000:00:01.0:pcie03]
  258. PCI: Setting latency timer of device 0000:00:1c.0 to 64
  259. assign_interrupt_mode Found MSI capability
  260. Allocate Port Service[0000:00:1c.0:pcie00]
  261. Allocate Port Service[0000:00:1c.0:pcie02]
  262. Allocate Port Service[0000:00:1c.0:pcie03]
  263. PCI: Setting latency timer of device 0000:00:1c.1 to 64
  264. assign_interrupt_mode Found MSI capability
  265. Allocate Port Service[0000:00:1c.1:pcie00]
  266. Allocate Port Service[0000:00:1c.1:pcie02]
  267. Allocate Port Service[0000:00:1c.1:pcie03]
  268. PCI: Setting latency timer of device 0000:00:1c.3 to 64
  269. assign_interrupt_mode Found MSI capability
  270. Allocate Port Service[0000:00:1c.3:pcie00]
  271. Allocate Port Service[0000:00:1c.3:pcie02]
  272. Allocate Port Service[0000:00:1c.3:pcie03]
  273. vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 1536k, total 14336k
  274. vesafb: mode is 1024x768x8, linelength=1024, pages=3
  275. vesafb: scrolling: redraw
  276. vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
  277. Console: switching to colour frame buffer device 128x48
  278. fb0: VESA VGA frame buffer device
  279. Real Time Clock Driver v1.12ac
  280. Linux agpgart interface v0.102
  281. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  282. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  283. loop: module loaded
  284. input: Macintosh mouse button emulation as /devices/virtual/input/input0
  285. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  286. i8042.c: Detected active multiplexing controller, rev 1.1.
  287. serio: i8042 KBD port at 0x60,0x64 irq 1
  288. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  289. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  290. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  291. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  292. mice: PS/2 mouse device common for all mice
  293. cpuidle: using governor ladder
  294. cpuidle: using governor menu
  295. TCP cubic registered
  296. NET: Registered protocol family 1
  297. NET: Registered protocol family 17
  298. RPC: Registered udp transport module.
  299. RPC: Registered tcp transport module.
  300. Freeing unused kernel memory: 264k freed
  301. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  302. libata version 3.00 loaded.
  303. ata_piix 0000:00:1f.2: version 2.12
  304. ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
  305. ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
  306. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  307. scsi0 : ata_piix
  308. scsi1 : ata_piix
  309. ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
  310. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
  311. ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
  312. ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  313. ata1.00: configured for UDMA/100
  314. ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC03, max UDMA/33
  315. ata2.00: configured for UDMA/33
  316. scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
  317. scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC03 PQ: 0 ANSI: 5
  318. usbcore: registered new interface driver usbfs
  319. usbcore: registered new interface driver hub
  320. usbcore: registered new device driver usb
  321. USB Universal Host Controller Interface driver v3.0
  322. ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  323. PCI: Setting latency timer of device 0000:00:1a.0 to 64
  324. uhci_hcd 0000:00:1a.0: UHCI Host Controller
  325. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  326. uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
  327. usb usb1: configuration #1 chosen from 1 choice
  328. hub 1-0:1.0: USB hub found
  329. hub 1-0:1.0: 2 ports detected
  330. ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
  331. PCI: Setting latency timer of device 0000:00:1a.1 to 64
  332. uhci_hcd 0000:00:1a.1: UHCI Host Controller
  333. uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
  334. uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
  335. usb usb2: configuration #1 chosen from 1 choice
  336. hub 2-0:1.0: USB hub found
  337. hub 2-0:1.0: 2 ports detected
  338. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17ks
  339. iwl3945: Copyright(c) 2003-2007 Intel Corporation
  340. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
  341. PCI: Setting latency timer of device 0000:03:00.0 to 64
  342. iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
  343. Driver 'sd' needs updating - please use bus_type methods
  344. Driver 'sr' needs updating - please use bus_type methods
  345. sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  346. sd 0:0:0:0: [sda] Write Protect is off
  347. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  348. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  349. sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  350. sd 0:0:0:0: [sda] Write Protect is off
  351. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  352. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  353. sda:<3>iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2
  354. iwl3945: Could not read microcode: -2
  355. sda1 sda2 sda3 sda4 <<6>ACPI: PCI interrupt for device 0000:03:00.0 disabled
  356. iwl3945: probe of 0000:03:00.0 failed with error -2
  357. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
  358. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  359. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  360. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
  361. uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
  362. sda5<6>usb usb3: configuration #1 chosen from 1 choice
  363. hub 3-0:1.0: USB hub found
  364. hub 3-0:1.0: 2 ports detected
  365. sda6 >
  366. sd 0:0:0:0: [sda] Attached SCSI disk
  367. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  368. Uniform CD-ROM driver Revision: 3.20
  369. sr 1:0:0:0: Attached scsi CD-ROM sr0
  370. ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
  371. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  372. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  373. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
  374. uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
  375. usb usb4: configuration #1 chosen from 1 choice
  376. hub 4-0:1.0: USB hub found
  377. hub 4-0:1.0: 2 ports detected
  378. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  379. PCI: Setting latency timer of device 0000:00:1d.2 to 64
  380. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  381. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
  382. uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
  383. usb usb5: configuration #1 chosen from 1 choice
  384. hub 5-0:1.0: USB hub found
  385. hub 5-0:1.0: 2 ports detected
  386. ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
  387. PCI: Setting latency timer of device 0000:00:1a.7 to 64
  388. ehci_hcd 0000:00:1a.7: EHCI Host Controller
  389. ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
  390. ehci_hcd 0000:00:1a.7: debug port 1
  391. PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  392. ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0504000
  393. ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  394. usb usb6: configuration #1 chosen from 1 choice
  395. hub 6-0:1.0: USB hub found
  396. hub 6-0:1.0: 4 ports detected
  397. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
  398. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  399. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  400. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
  401. ehci_hcd 0000:00:1d.7: debug port 1
  402. PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  403. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
  404. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  405. usb usb7: configuration #1 chosen from 1 choice
  406. hub 7-0:1.0: USB hub found
  407. hub 7-0:1.0: 6 ports detected
  408. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
  409. PCI: Setting latency timer of device 0000:04:00.0 to 64
  410. sky2 0000:04:00.0: v1.20 addr 0xf0200000 irq 19 Yukon-EC Ultra (0xb4) rev 3
  411. sky2 eth0: addr 00:13:77:38:fd:c9
  412. usb 6-2: new high speed USB device using ehci_hcd and address 2
  413. usb 6-2: configuration #1 chosen from 1 choice
  414. usb 3-1: new low speed USB device using uhci_hcd and address 2
  415. usb 3-1: configuration #1 chosen from 1 choice
  416. usb 3-2: new low speed USB device using uhci_hcd and address 3
  417. usb 3-2: configuration #1 chosen from 1 choice
  418. usb 5-2: new full speed USB device using uhci_hcd and address 2
  419. usb 5-2: configuration #1 chosen from 1 choice
  420. usbcore: registered new interface driver hiddev
  421. input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input2
  422. input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
  423. input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input3
  424. input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:1d.0-2
  425. input: Generic USB K/B as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input4
  426. input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:1d.0-2
  427. usbcore: registered new interface driver usbhid
  428. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  429. Attempting manual resume
  430. ReiserFS: sda5: found reiserfs format "3.6" with standard journal
  431. ReiserFS: sda5: using ordered data mode
  432. ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  433. ReiserFS: sda5: checking transaction log (sda5)
  434. ReiserFS: sda5: Using r5 hash to sort names
  435. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  436. PCI: Setting latency timer of device 0000:00:1b.0 to 64
  437. hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
  438. snd_pcm_oss: Unknown symbol snd_verbose_printk
  439. snd_seq_oss: Unknown symbol snd_verbose_printk
  440. snd_pcm_oss: Unknown symbol snd_verbose_printk
  441. snd_seq_oss: Unknown symbol snd_verbose_printk
  442. si3054: cannot initialize. EXT MID = 0000
  443. nvidia: module license 'NVIDIA' taints kernel.
  444. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  445. PCI: Setting latency timer of device 0000:01:00.0 to 64
  446. NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.09  Fri Jan 11 14:04:37 PST 2008
  447. ACPI: AC Adapter [ADP1] (on-line)
  448. ACPI: Battery Slot [BAT1] (battery present)
  449. input: Power Button (FF) as /devices/virtual/input/input5
  450. ACPI: Power Button (FF) [PWRF]
  451. input: Lid Switch as /devices/virtual/input/input6
  452. ACPI: Lid Switch [LID0]
  453. input: Power Button (CM) as /devices/virtual/input/input7
  454. ACPI: Power Button (CM) [PWRB]
  455. input: Sleep Button (CM) as /devices/virtual/input/input8
  456. ACPI: Sleep Button (CM) [SLPB]
  457. ACPI: Transitioning device [FAN0] to D3
  458. ACPI: Transitioning device [FAN0] to D3
  459. ACPI: Fan [FAN0] (off)
  460. Linux video capture interface: v2.00
  461. usbcore: registered new interface driver gspca
  462. /home/tobias/Arch/devel/2.6.24/extra/gspcav1/src/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered
  463. ACPI: SSDT 7FED8474, 0328 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
  464. ACPI: SSDT 7FED7E54, 059B (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
  465. Monitor-Mwait will be used to enter C-1 state
  466. Monitor-Mwait will be used to enter C-2 state
  467. ACPI: CPU0 (power states: C1[C1] C2[C2])
  468. ACPI: Processor [CPU0] (supports 8 throttling states)
  469. ACPI: SSDT 7FED879C, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
  470. ACPI: SSDT 7FED83EF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
  471. ACPI: CPU1 (power states: C1[C1] C2[C2])
  472. ACPI: Processor [CPU1] (supports 8 throttling states)
  473. ACPI: Thermal Zone [TZ00] (52 C)
  474. ACPI: Thermal Zone [TZ01] (52 C)
  475. ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFFE [20070126]
  476. Pid: 3519, comm: modprobe Tainted: P        2.6.24-ARCH #1

  478. Call Trace:
  479. [<ffffffff803b38fa>] acpi_ut_update_ref_count+0x50/0x9d
  480. [<ffffffff803b3da5>] acpi_format_exception+0x2c/0x35
  481. [<ffffffff803b2b3f>] acpi_ut_exception+0x25/0x8c
  482. [<ffffffff8039e31c>] acpi_evaluate_integer+0xb6/0xc7
  483. [<ffffffff88b43c2b>] :video:acpi_video_bus_add+0xc3d/0xc53
  484. [<ffffffff802ebb90>] sysfs_ilookup_test+0x0/0x10
  485. [<ffffffff802ebe39>] sysfs_find_dirent+0x29/0x40
  486. [<ffffffff803b6e0a>] acpi_device_probe+0x43/0x91
  487. [<ffffffff803e825c>] driver_probe_device+0x9c/0x1b0
  488. [<ffffffff803e8450>] __driver_attach+0x0/0xb0
  489. [<ffffffff803e84f5>] __driver_attach+0xa5/0xb0
  490. [<ffffffff803e74cd>] bus_for_each_dev+0x4d/0x80
  491. [<ffffffff803e78dc>] bus_add_driver+0xac/0x220
  492. [<ffffffff8806a03c>] :video:acpi_video_init+0x3c/0x5e
  493. [<ffffffff8026316e>] sys_init_module+0x18e/0x1a30
  494. [<ffffffff8020c49e>] system_call+0x7e/0x83

  496. ACPI Exception (video-1708): UNKNOWN_STATUS_CODE, Cant attach device [20070126]
  497. input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input9
  498. sd 0:0:0:0: Attached scsi generic sg0 type 0
  499. sr 1:0:0:0: Attached scsi generic sg1 type 5
  500. ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
  501. input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
  502. ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  503. input: PC Speaker as /devices/platform/pcspkr/input/input11
  504. ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
  505. rtc_cmos: probe of 00:07 failed with error -16
  506. Bluetooth: Core ver 2.11
  507. NET: Registered protocol family 31
  508. Bluetooth: HCI device and connection manager initialized
  509. Bluetooth: HCI socket layer initialized
  510. Bluetooth: HCI USB driver ver 2.9
  511. usbcore: registered new interface driver hci_usb
  512. ricoh-mmc: Ricoh MMC Controller disabling driver
  513. ricoh-mmc: Copyright(c) Philip Langdale
  514. ricoh-mmc: Ricoh MMC controller found at 0000:05:09.2 [1180:0843] (rev 0)
  515. ricoh-mmc: Main firewire function not found. Cannot disable controller.
  516. Yenta: CardBus bridge found at 0000:05:09.0 [144d:c031]
  517. snd_pcm_oss: Unknown symbol snd_verbose_printk
  518. sdhci: Secure Digital Host Controller Interface driver
  519. sdhci: Copyright(c) Pierre Ossman
  520. snd_pcm_oss: Unknown symbol snd_verbose_printk
  521. Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
  522. Socket status: 30000006
  523. Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
  524. pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
  525. sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 18)
  526. ACPI: PCI Interrupt 0000:05:09.1[C] -> GSI 18 (level, low) -> IRQ 18
  527. sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
  528. PCI: Setting latency timer of device 0000:05:09.1 to 64
  529. mmc0: SDHCI at 0xf0401000 irq 18 DMA
  530. snd_seq_oss: Unknown symbol snd_verbose_printk
  531. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
  532. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
  533. snd_seq_oss: Unknown symbol snd_verbose_printk
  534. fuse init (API version 7.9)
  535. Adding 497972k swap on /dev/sda6.  Priority:-1 extents:1 across:497972k
  536. sky2 eth0: enabling interface
  537. sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
  538. NET: Registered protocol family 10
  539. lo: Disabled Privacy Extensions
复制代码



To jarryson
arch上的WiKi有关于linux-uvc的安装相关内容, 但我也用不上linux-uvc
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表