各位大虾们..小弟第一次装mandriva请指教一下装显卡驱动的问题????

jonhid

电脑配置:
cpu : amd4600+ x2
显卡: nvidia geforce6150se /nforce430(板载)
显示器:液晶
装的系统是32bit的.

问题描述:

系统在安装过程中能够用图形模式安装.装好后应该是要进入桌面的时候显示器显示"显示超出显示范围"..后面进入了文本模式查看了xorg.conf文件..应该是显卡驱动上了..但怎么也不能显示..xorg.conf里也是显示的跟我显卡差不多.是这样的::
Section "Device"
    Identifier "device1"
    VendorName "nVidia Corporation"
    BoardName "NVIDIA GeForce 6100 and later"
    Driver "nv"
    Option "DPMS"
EndSection

..从上面反应的情况应该是显卡驱动的问题..

以下为xorg.conf默认的配置文件
# File generated by XFdrake (rev )

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Disable "dri"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "glx" # 3D layer
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "lug'n Play"
    ModelName "L9WA4"
    HorizSync 31-81
    VertRefresh 56-75
   
    # Monitor preferred modeline (59.9 Hz vsync, 55.9 kHz hsync, ratio 16/10, 89 dpi)
    ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "nVidia Corporation"
    BoardName "NVIDIA GeForce 6100 and later"
    Driver "nv"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection
补充:
用了默认的其它的启动项启动结果同样.

jonhid

问题已解决...的确是显卡驱动的问题..可能是系统自带的驱动不行..后来在管网下了190版的驱动就能解决..安装过程中提示要安装gcc kernel-devel make用urpmi安装后就可以直接安装成功..我用的是lxde..还不错.

2mouse

其实置顶的精华贴上有Nidia显卡的安装方法，比你所用的方法简单，更重要的是方便升级，不用总是关注官网