设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Redhat/Fedora/CentOS Linux › Fedora12有谁升级到最新内核2.6.32.10-90了没？ ...
返回列表 发新帖
查看: 1626|回复: 8

Fedora12有谁升级到最新内核2.6.32.10-90了没？

[复制链接]
发表于 2010-4-3 00:47:00 | 显示全部楼层 |阅读模式
今天更新了系统，装了最新内核2.6.32.10，reboot后到
starting udev:
就出了一大堆代码，但最后又显示          [ok]
然后是starting Hostname:                  [ok]
就不动了。
还好原来的内核还能用，原来的是2.6.31.12-174.2.3
有哪个大哥帮我解释一下啊？
回复

使用道具 举报

U571
发表于 2010-4-3 00:58:38 | 显示全部楼层
楼主好歹上个log吧！

BTW: 已更新到 2.6.32.10-90
udev有些许问题，但正常进X
回复 支持 反对

使用道具 举报

发表于 2010-4-3 01:08:54 | 显示全部楼层
看样子楼主应该是没有重新安装显卡驱动然后开不了 X 而已。

BTW，我上了 2.6.32.10-92 了。。。
回复 支持 反对

使用道具 举报

发表于 2010-4-3 08:14:07 | 显示全部楼层
Post by LskywaLker;2080202
今天更新了系统，装了最新内核2.6.32.10，reboot后到
starting udev:
就出了一大堆代码，但最后又显示          [ok]
然后是starting Hostname:                  [ok]
就不动了。
还好原来的内核还能用，原来的是2.6.31.12-174.2.3
有哪个大哥帮我解释一下啊？


偶的64位fedora12已经升级，没有任何问题。
回复 支持 反对

使用道具 举报

ooooo825
发表于 2010-4-3 08:17:52 | 显示全部楼层
我跟楼主碰到了完全一样的问题。开机出现一大堆英文，其中有很多name_count maxed, losing inode data: ，然后在starting hostname那里就不动了。
  2. system 00:09: ioport range 0x4d0-0x4d1 has been reserved
  3. system 00:0a: ioport range 0xf400-0xf4fe has been reserved
  4. system 00:0a: ioport range 0x1080-0x10bf has been reserved
  5. system 00:0a: ioport range 0x10c0-0x10df has been reserved
  6. system 00:0a: ioport range 0x809-0x809 has been reserved
  7. system 00:0b: iomem range 0x0-0x9efff could not be reserved
  8. system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
  9. system 00:0b: iomem range 0xc0000-0xcffff has been reserved
  10. system 00:0b: iomem range 0xe0000-0xfffff has been reserved
  11. system 00:0b: iomem range 0x100000-0x7fe6d7ff could not be reserved
  12. system 00:0b: iomem range 0x7fe6d800-0x7fefffff has been reserved
  13. system 00:0b: iomem range 0x7ff00000-0x7fffffff has been reserved
  14. system 00:0b: iomem range 0x7ff00000-0x806fffff could not be reserved
  15. system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
  16. system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
  17. system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
  18. system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved
  19. system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
  20. system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved
  21. system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved
  22. system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved
  23. system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
  24. system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved
  25. system 00:0b: iomem range 0xf4000000-0xf7ffffff has been reserved
  26. pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  27. pci 0000:00:01.0:   IO window: 0xd000-0xdfff
  28. pci 0000:00:01.0:   MEM window: 0xfa000000-0xfeafffff
  29. pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
  30. pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
  31. pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
  32. pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
  33. pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
  34. pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
  35. pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
  36. pci 0000:00:1c.1:   MEM window: 0xf9f00000-0xf9ffffff
  37. pci 0000:00:1c.1:   PREFETCH window: 0x00000080400000-0x000000805fffff
  38. pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
  39. pci 0000:00:1c.3:   IO window: 0xc000-0xcfff
  40. pci 0000:00:1c.3:   MEM window: 0xf9c00000-0xf9efffff
  41. pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
  42. pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
  43. pci 0000:00:1e.0:   IO window: disabled
  44. pci 0000:00:1e.0:   MEM window: 0xf9b00000-0xf9bfffff
  45. pci 0000:00:1e.0:   PREFETCH window: disabled
  46.   alloc irq_desc for 16 on node -1
  47.   alloc kstat_irqs on node -1
  48. pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  49. pci 0000:00:01.0: setting latency timer to 64
  50. pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  51. pci 0000:00:1c.0: setting latency timer to 64
  52.   alloc irq_desc for 17 on node -1
  53.   alloc kstat_irqs on node -1
  54. pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  55. pci 0000:00:1c.1: setting latency timer to 64
  56.   alloc irq_desc for 19 on node -1
  57.   alloc kstat_irqs on node -1
  58. pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  59. pci 0000:00:1c.3: setting latency timer to 64
  60. pci 0000:00:1e.0: setting latency timer to 64
  61. pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  62. pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  63. pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
  64. pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
  65. pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
  66. pci_bus 0000:0b: resource 0 io:  [0x2000-0x2fff]
  67. pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff]
  68. pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff]
  69. pci_bus 0000:0c: resource 0 io:  [0x3000-0x3fff]
  70. pci_bus 0000:0c: resource 1 mem: [0xf9f00000-0xf9ffffff]
  71. pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff]
  72. pci_bus 0000:0d: resource 0 io:  [0xc000-0xcfff]
  73. pci_bus 0000:0d: resource 1 mem: [0xf9c00000-0xf9efffff]
  74. pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff]
  75. pci_bus 0000:03: resource 1 mem: [0xf9b00000-0xf9bfffff]
  76. pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
  77. pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
  78. NET: Registered protocol family 2
  79. IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  80. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  81. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  82. TCP: Hash tables configured (established 262144 bind 65536)
  83. TCP reno registered
  84. NET: Registered protocol family 1
  85. pci 0000:01:00.0: Boot video device
  86. Trying to unpack rootfs image as initramfs...
  87. Freeing initrd memory: 12560k freed
  88. Simple Boot Flag at 0x79 set to 0x1
  89. audit: initializing netlink socket (disabled)
  90. type=2000 audit(1270244194.551:1): initialized
  91. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  92. VFS: Disk quotas dquot_6.5.2
  93. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  94. msgmni has been set to 4014
  95. SELinux:  Registering netfilter hooks
  96. alg: No test for stdrng (krng)
  97. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  98. io scheduler noop registered
  99. io scheduler anticipatory registered
  100. io scheduler deadline registered
  101. io scheduler cfq registered (default)
  102.   alloc irq_desc for 24 on node -1
  103.   alloc kstat_irqs on node -1
  104. pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
  105. pcieport 0000:00:01.0: setting latency timer to 64
  106.   alloc irq_desc for 25 on node -1
  107.   alloc kstat_irqs on node -1
  108. pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
  109. pcieport 0000:00:1c.0: setting latency timer to 64
  110.   alloc irq_desc for 26 on node -1
  111.   alloc kstat_irqs on node -1
  112. pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
  113. pcieport 0000:00:1c.1: setting latency timer to 64
  114.   alloc irq_desc for 27 on node -1
  115.   alloc kstat_irqs on node -1
  116. pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
  117. pcieport 0000:00:1c.3: setting latency timer to 64
  118. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  119. pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  120. acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  121. acpiphp: Slot [1] registered
  122. pci-stub: invalid id string ""
  123. ACPI: AC Adapter [AC] (on-line)
  124. input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  125. ACPI: Lid Switch [LID]
  126. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  127. ACPI: Power Button [PBTN]
  128. input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
  129. ACPI: Sleep Button [SBTN]
  130. ACPI: SSDT 000000007fe6e4f2 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
  131. ACPI: SSDT 000000007fe6de88 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
  132. Monitor-Mwait will be used to enter C-1 state
  133. Monitor-Mwait will be used to enter C-2 state
  134. Monitor-Mwait will be used to enter C-3 state
  135. Marking TSC unstable due to TSC halts in idle
  136. processor LNXCPU:00: registered as cooling_device0
  137. ACPI: SSDT 000000007fe6e778 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
  138. ACPI: SSDT 000000007fe6e46d 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
  139. Switching to clocksource hpet
  140. processor LNXCPU:01: registered as cooling_device1
  141. thermal LNXTHERM:01: registered as thermal_zone0
  142. ACPI: Thermal Zone [THM] (36 C)
  143. Non-volatile memory driver v1.3
  144. Linux agpgart interface v0.103
  145. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  146. brd: module loaded
  147. loop: module loaded
  148. input: Macintosh mouse button emulation as /devices/virtual/input/input3
  149. ata_piix 0000:00:1f.1: version 2.13
  150. ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  151. ata_piix 0000:00:1f.1: setting latency timer to 64
  152. scsi0 : ata_piix
  153. scsi1 : ata_piix
  154. ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
  155. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
  156. ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  157. ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  158. ACPI: Battery Slot [BAT0] (battery present)
  159. ata2: port disabled. ignoring.
  160. ata_piix 0000:00:1f.2: setting latency timer to 64
  161. scsi2 : ata_piix
  162. scsi3 : ata_piix
  163. ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
  164. ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
  165. Fixed MDIO Bus: probed
  166. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  167.   alloc irq_desc for 22 on node -1
  168.   alloc kstat_irqs on node -1
  169. ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  170. ehci_hcd 0000:00:1a.7: setting latency timer to 64
  171. ehci_hcd 0000:00:1a.7: EHCI Host Controller
  172. ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  173. ehci_hcd 0000:00:1a.7: debug port 1
  174. ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
  175. ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
  176. ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  177. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  178. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  179. usb usb1: Product: EHCI Host Controller
  180. usb usb1: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 ehci_hcd
  181. usb usb1: SerialNumber: 0000:00:1a.7
  182. usb usb1: configuration #1 chosen from 1 choice
  183. hub 1-0:1.0: USB hub found
  184. hub 1-0:1.0: 4 ports detected
  185.   alloc irq_desc for 20 on node -1
  186.   alloc kstat_irqs on node -1
  187. ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  188. ehci_hcd 0000:00:1d.7: setting latency timer to 64
  189. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  190. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  191. ehci_hcd 0000:00:1d.7: debug port 1
  192. ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
  193. ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
  194. ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
  195. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  196. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  197. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  198. usb usb2: Product: EHCI Host Controller
  199. usb usb2: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 ehci_hcd
  200. usb usb2: SerialNumber: 0000:00:1d.7
  201. usb usb2: configuration #1 chosen from 1 choice
  202. hub 2-0:1.0: USB hub found
  203. hub 2-0:1.0: 6 ports detected
  204. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  205. uhci_hcd: USB Universal Host Controller Interface driver
  206. uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  207. uhci_hcd 0000:00:1a.0: setting latency timer to 64
  208. uhci_hcd 0000:00:1a.0: UHCI Host Controller
  209. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  210. uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
  211. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  212. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  213. usb usb3: Product: UHCI Host Controller
  214. usb usb3: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 uhci_hcd
  215. usb usb3: SerialNumber: 0000:00:1a.0
  216. usb usb3: configuration #1 chosen from 1 choice
  217. hub 3-0:1.0: USB hub found
  218. hub 3-0:1.0: 2 ports detected
  219.   alloc irq_desc for 21 on node -1
  220.   alloc kstat_irqs on node -1
  221. uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  222. uhci_hcd 0000:00:1a.1: setting latency timer to 64
  223. uhci_hcd 0000:00:1a.1: UHCI Host Controller
  224. uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  225. uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
  226. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  227. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  228. usb usb4: Product: UHCI Host Controller
  229. usb usb4: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 uhci_hcd
  230. usb usb4: SerialNumber: 0000:00:1a.1
  231. usb usb4: configuration #1 chosen from 1 choice
  232. hub 4-0:1.0: USB hub found
  233. hub 4-0:1.0: 2 ports detected
  234. uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  235. uhci_hcd 0000:00:1d.0: setting latency timer to 64
  236. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  237. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  238. uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
  239. usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  240. usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  241. usb usb5: Product: UHCI Host Controller
  242. usb usb5: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 uhci_hcd
  243. usb usb5: SerialNumber: 0000:00:1d.0
  244. usb usb5: configuration #1 chosen from 1 choice
  245. hub 5-0:1.0: USB hub found
  246. hub 5-0:1.0: 2 ports detected
  247. uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  248. uhci_hcd 0000:00:1d.1: setting latency timer to 64
  249. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  250. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  251. uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
  252. usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  253. usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  254. usb usb6: Product: UHCI Host Controller
  255. usb usb6: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 uhci_hcd
  256. usb usb6: SerialNumber: 0000:00:1d.1
  257. usb usb6: configuration #1 chosen from 1 choice
  258. hub 6-0:1.0: USB hub found
  259. hub 6-0:1.0: 2 ports detected
  260. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
  261. uhci_hcd 0000:00:1d.2: setting latency timer to 64
  262. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  263. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  264. uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
  265. usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  266. usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  267. usb usb7: Product: UHCI Host Controller
  268. usb usb7: Manufacturer: Linux 2.6.32.9-70.fc12.x86_64 uhci_hcd
  269. usb usb7: SerialNumber: 0000:00:1d.2
  270. usb usb7: configuration #1 chosen from 1 choice
  271. hub 7-0:1.0: USB hub found
  272. hub 7-0:1.0: 2 ports detected
  273. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  274. serio: i8042 KBD port at 0x60,0x64 irq 1
  275. serio: i8042 AUX port at 0x60,0x64 irq 12
  276. mice: PS/2 mouse device common for all mice
  277. rtc_cmos 00:03: RTC can wake from S4
  278. rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  279. rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  280. device-mapper: uevent: version 1.0.3
  281. device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  282. cpuidle: using governor ladder
  283. cpuidle: using governor menu
  284. usbcore: registered new interface driver hiddev
  285. usbcore: registered new interface driver usbhid
  286. usbhid: v2.6:USB HID core driver
  287. nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  288. CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  289. nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  290. sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  291. ip_tables: (C) 2000-2006 Netfilter Core Team
  292. TCP cubic registered
  293. Initializing XFRM netlink socket
  294. NET: Registered protocol family 17
  295. PM: Resume from disk failed.
  296. registered taskstats version 1
  297. No TPM chip found, activating TPM-bypass!
  298.   Magic number: 6:944:650
  299. rtc_cmos 00:03: setting system clock to 2010-04-02 21:36:35 UTC (1270244195)
  300. Initalizing network drop monitor service
  301. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  302. ata1.00: configured for UDMA/33
  303. scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
  304. sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  305. Uniform CD-ROM driver Revision: 3.20
  306. sr 0:0:0:0: Attached scsi CD-ROM sr0
  307. sr 0:0:0:0: Attached scsi generic sg0 type 5
  308. usb 6-1: new low speed USB device using uhci_hcd and address 2
  309. usb 6-1: New USB device found, idVendor=0e6a, idProduct=6001
  310. usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  311. usb 6-1: Product: HID Keyboard Device
  312. usb 6-1: configuration #1 chosen from 1 choice
  313. Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000
  314. serio: Synaptics pass-through port at isa0060/serio1/input0
  315. input: HID Keyboard Device as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5
  316. generic-usb 0003:0E6A:6001.0001: input,hidraw0: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:1d.1-1/input0
  317. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
  318. input: HID Keyboard Device as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input7
  319. generic-usb 0003:0E6A:6001.0002: input,hidraw1: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:1d.1-1/input1
  320. ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  321. ata3.01: SATA link down (SStatus 0 SControl 300)
  322. ata3.00: ATA-7: ST9120822AS, 3.CDD, max UDMA/133
  323. ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
  324. ata3.00: configured for UDMA/133
  325. scsi 2:0:0:0: Direct-Access     ATA      ST9120822AS      3.CD PQ: 0 ANSI: 5
  326. sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
  327. sd 2:0:0:0: Attached scsi generic sg1 type 0
  328. sd 2:0:0:0: [sda] Write Protect is off
  329. sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  330. sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  331. sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  332. sd 2:0:0:0: [sda] Attached SCSI disk
  333. usb 5-2: new low speed USB device using uhci_hcd and address 2
  334. usb 5-2: New USB device found, idVendor=0461, idProduct=4d22
  335. usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  336. usb 5-2: Product: USB Optical Mouse
  337. usb 5-2: configuration #1 chosen from 1 choice
  338. ata4.01: failed to resume link (SControl 0)
  339. ata4.00: SATA link down (SStatus 0 SControl 300)
  340. ata4.01: SATA link down (SStatus 0 SControl 0)
  341. Freeing unused kernel memory: 936k freed
  342. Write protecting the kernel read-only data: 6592k
  343. dracut: dracut-004-4.fc12
  344. input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input8
  345. generic-usb 0003:0461:4D22.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
  346. udev: starting version 145
  347. dracut: Starting plymouth daemon
  348. acpi device:30: registered as cooling_device2
  349. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input9
  350. ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
  351. firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  352. firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
  353. device-mapper: multipath: version 1.1.0 loaded
  354. firewire_core: created device fw0: GUID 4a4fc000257e1c5c, S400
  355. EXT4-fs (sda2): mounted filesystem with ordered data mode
  356. dracut: Mounted root filesystem /dev/sda2
  357. dracut: Switching root
  358. udev: starting version 145
  359. ACPI: WMI: Mapper loaded
  360. input: Dell WMI hotkeys as /devices/virtual/input/input10
  361. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
  362. iTCO_vendor_support: vendor-support=0
  363. ricoh-mmc: Ricoh MMC Controller disabling driver
  364. ricoh-mmc: Copyright(c) Philip Langdale
  365. ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12)
  366. ricoh-mmc: Controller is now disabled.
  367. cfg80211: Calling CRDA to update world regulatory domain
  368. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
  369. iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
  370. iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  371. i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  372. sdhci: Secure Digital Host Controller Interface driver
  373. sdhci: Copyright(c) Pierre Ossman
  374. sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
  375.   alloc irq_desc for 18 on node -1
  376.   alloc kstat_irqs on node -1
  377. sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
  378. Registered led device: mmc0::
  379. mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
  380. b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  381. cfg80211: World regulatory domain updated:
  382.         (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  383.         (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  384.         (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  385.         (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  386.         (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  387.         (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  388. ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
  389. b44.c:v2.0
  390. eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:a1:e8:6e
  391. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
  392. iwl3945: Copyright(c) 2003-2009 Intel Corporation
  393. iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  394. iwl3945 0000:0c:00.0: setting latency timer to 64
  395. iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
  396. iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
  397.   alloc irq_desc for 28 on node -1
  398.   alloc kstat_irqs on node -1
  399. iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
  400. name_count maxed, losing inode data: dev=00:07, inode=9295
  401. name_count maxed, losing inode data: dev=00:07, inode=9295
  402. name_count maxed, losing inode data: dev=00:07, inode=9295
  403. name_count maxed, losing inode data: dev=00:07, inode=9295
  404. name_count maxed, losing inode data: dev=00:07, inode=9295
  405. name_count maxed, losing inode data: dev=00:07, inode=9295
  406. name_count maxed, losing inode data: dev=00:07, inode=9310
  407. name_count maxed, losing inode data: dev=00:07, inode=9310
  408. name_count maxed, losing inode data: dev=00:07, inode=9310
  409. name_count maxed, losing inode data: dev=00:07, inode=9310
  410. name_count maxed, losing inode data: dev=00:07, inode=9310
  411. name_count maxed, losing inode data: dev=00:07, inode=9310
  412. name_count maxed, losing inode data: dev=00:07, inode=9310
  413. name_count maxed, losing inode data: dev=00:07, inode=9310
  414. name_count maxed, losing inode data: dev=00:07, inode=9310
  415. name_count maxed, losing inode data: dev=00:07, inode=9310
  416. name_count maxed, losing inode data: dev=00:07, inode=9310
  417. name_count maxed, losing inode data: dev=00:07, inode=9310
  418. name_count maxed, losing inode data: dev=00:07, inode=9310
  419. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  420. HDA Intel 0000:00:1b.0: setting latency timer to 64
  421. name_count maxed, losing inode data: dev=00:07, inode=9295
  422. name_count maxed, losing inode data: dev=00:07, inode=9349
  423. phy0: Selected rate control algorithm 'iwl-3945-rs'
  424. name_count maxed, losing inode data: dev=00:07, inode=9295
  425. name_count maxed, losing inode data: dev=00:07, inode=9351
  426. name_count maxed, losing inode data: dev=00:07, inode=9351
  427. name_count maxed, losing inode data: dev=00:07, inode=9351
  428. name_count maxed, losing inode data: dev=00:07, inode=9351
  429. name_count maxed, losing inode data: dev=00:07, inode=9351
  430. name_count maxed, losing inode data: dev=00:07, inode=9351
  431. name_count maxed, losing inode data: dev=00:07, inode=9295
  432. name_count maxed, losing inode data: dev=00:07, inode=9358
  433. name_count maxed, losing inode data: dev=00:07, inode=9358
  434. name_count maxed, losing inode data: dev=00:07, inode=9358
  435. name_count maxed, losing inode data: dev=00:07, inode=9359
  436. name_count maxed, losing inode data: dev=00:07, inode=9359
  437. name_count maxed, losing inode data: dev=00:07, inode=9359
  438. name_count maxed, losing inode data: dev=00:07, inode=9359
  439. name_count maxed, losing inode data: dev=00:07, inode=9359
  440. name_count maxed, losing inode data: dev=00:07, inode=9359
  441. name_count maxed, losing inode data: dev=00:07, inode=9359
  442. name_count maxed, losing inode data: dev=00:07, inode=9359
  443. name_count maxed, losing inode data: dev=00:07, inode=9359
  444. name_count maxed, losing inode data: dev=00:07, inode=9359
  445. name_count maxed, losing inode data: dev=00:07, inode=9359
  446. name_count maxed, losing inode data: dev=00:07, inode=9359
  447. name_count maxed, losing inode data: dev=00:07, inode=9359
  448. name_count maxed, losing inode data: dev=00:07, inode=9361
  449. name_count maxed, losing inode data: dev=00:07, inode=9361
  450. name_count maxed, losing inode data: dev=00:07, inode=9361
  451. name_count maxed, losing inode data: dev=00:07, inode=9361
  452. name_count maxed, losing inode data: dev=00:07, inode=9361
  453. name_count maxed, losing inode data: dev=00:07, inode=9361
  454. name_count maxed, losing inode data: dev=00:07, inode=9361
  455. name_count maxed, losing inode data: dev=00:07, inode=9361
  456. name_count maxed, losing inode data: dev=00:07, inode=9361
  457. name_count maxed, losing inode data: dev=00:07, inode=9361
  458. name_count maxed, losing inode data: dev=00:07, inode=9361
  459. name_count maxed, losing inode data: dev=00:07, inode=9360
  460. name_count maxed, losing inode data: dev=00:07, inode=9360
  461. name_count maxed, losing inode data: dev=00:07, inode=9360
  462. ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
  463. ALSA sound/pci/hda/hda_codec.c:3885:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  464. ALSA sound/pci/hda/hda_codec.c:3889:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
  465. ALSA sound/pci/hda/hda_codec.c:3890:    mono: mono_out=0x0
  466. ALSA sound/pci/hda/hda_codec.c:3893:    dig-out=0x21/0x0
  467. ALSA sound/pci/hda/hda_codec.c:3901:    inputs: mic=0xb, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
  468. ALSA sound/pci/hda/patch_sigmatel.c:2974: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
  469. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
  470. input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  471. input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  472. name_count maxed, losing inode data: dev=00:05, inode=9425
  473. name_count maxed, losing inode data: dev=00:05, inode=9221
  474. name_count maxed, losing inode data: dev=00:05, inode=9221
  475. name_count maxed, losing inode data: dev=00:05, inode=9221
  476. name_count maxed, losing inode data: dev=00:05, inode=9221
  477. nvidia: module license 'NVIDIA' taints kernel.
  478. Disabling lock debugging due to kernel taint
  479. cfg80211: Calling CRDA for country: CN
  480. cfg80211: Regulatory domain changed to country: CN
  481.         (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  482.         (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  483.         (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
  484. nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  485. nvidia 0000:01:00.0: setting latency timer to 64
  486. NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
  487. ALSA sound/pci/hda/hda_intel.c:698: azx_get_response timeout, switching to polling mode: last cmd=0x01bb0000
  488. EXT4-fs (sda1): mounted filesystem with ordered data mode
  489. EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
  490. EXT4-fs (sda6): mounted filesystem with ordered data mode
  491. EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
  492. EXT4-fs (sda7): mounted filesystem with ordered data mode
  493. Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
复制代码
回复 支持 反对

使用道具 举报

ebird98
发表于 2010-4-3 09:12:23 | 显示全部楼层
同情～
偶早已安装，没问题…
回复 支持 反对

使用道具 举报

发表于 2010-4-3 13:19:55 | 显示全部楼层
同4楼，也没有问题。
回复 支持 反对

使用道具 举报

nahcoiii
发表于 2010-4-4 11:04:04 | 显示全部楼层
安装了，出现了同样的问题
回复 支持 反对

使用道具 举报

发表于 2010-4-7 12:51:39 | 显示全部楼层
我用联想的笔记本装fedora 12，升级到2.6.32.10-90内核后出现楼主所说的相同问题，但一台兼容台式机则没有问题，我估计可能是2.6.32.10-90内核中的某些部分有很大bug吧。我在笔记本上已经退回到fedora 12自带的老内核，然后下载了2.6.33.2最新稳定版内核源代码，自己编译安装了，很好用，哈哈！
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表