LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1086|回复: 13

redhat8.0 install the videocard problem?

[复制链接]
发表于 2002-11-30 06:49:36 | 显示全部楼层 |阅读模式
the driver for my geforce256 videocard can not be installed,I download the driver from official website,but the driver edition is only for 7.3,I try to use it,when I had installed,I can not enter the X-Window system,some info as follow:
Failed to load "dri"
Failed to load "glx"
if I change this lineriver "nv" to Driver "nvidia"
then diaplay the follow text:
Can not find the Module "nvidia"
So I just uninstalled the driver except the kernel,now it goes normal,but the input mothed lost,so I can only use my poor english for help.
I just wanna get a simply way here,thanks!!!
发表于 2002-11-30 12:28:54 | 显示全部楼层
下载源码安装
 楼主| 发表于 2002-11-30 20:46:27 | 显示全部楼层
请大家帮忙阿,不得已,只好又用上了window,请问8.0版的源码在何处可以下载到,下载后怎么编译呢,谢谢大家
发表于 2002-12-2 09:24:46 | 显示全部楼层
源码是不分版本的,下载下来编译就好了,或者下载.tar.gz的压缩包也可以。显卡驱程是linux中非常常见的问题,不要轻易放弃啊
发表于 2002-12-2 13:34:16 | 显示全部楼层
http://www.linuxsir.cn/forum.php?mod=viewthread&tid=8024
这个显卡应该不成问题,看一下这个就知道了
 楼主| 发表于 2002-12-2 21:57:05 | 显示全部楼层
先谢过了,我马上试试
 楼主| 发表于 2002-12-3 00:28:42 | 显示全部楼层
唉,我快疯了,刚装了才一天就重装了一次,难道这次又要我重装?
大侠,救救我吧
我按照你给的帖子下载了那两个文件,但是编译内核时始终不能make成功,好多error,只有glx驱动可以make通过,于是我在nvidia的网站上下载了
NVIDIA_kernel-1.0-3123-rh73up.2.4.18_10.athlon.rpm(我的cpu为duron600)
来安装,提示
modprobe:Can't locate module NVdriver
但是下面有installed successful的字样,我没管它,这样可以正常进入x-window
,然后我继续make 了哪个glx驱动,照着你的改了XF86Config后,就不能进入了
提示Failed to initialize the NVdriver kernel module!
把XF86Config恢复了之后,还是不行,好象提示是什么
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved! [GLX]: Calling GlxExtensionInit

Fatal server error:
Caught signal 11. Server aborting
注释掉Load "dri"后就提示Failed to initialize the NVdriver kernel module!
大哥,这到底是怎么回事啊,我的linux内核版本2.4.18.14,nvidia的网站上只有for 2.4.18.10的显卡内核.
我有个疑问,make到底是怎么使用的,另make -v显示版本为GNU C++ make 3.79.1

那位大侠不吝赐教啊,万分感激,我真的不想再重装了
发表于 2002-12-3 14:48:59 | 显示全部楼层
是因为你的系统少东西..
系统安装应该用[完全安装],这对于新后来说是最好的安装方式。因为可能少的东西太多了,所以建议完全安装来试一下。
这个帖子我在RH 7.2 8.0 7.3 AS 2.1 以及MD 9.0 8.2 SuSE 红旗 Slackware都测试通过。我觉得安不上,应该多想一想。。

[color=blue
]
如果您对linux不是太了解,建议用[完全安装方式]
 楼主| 发表于 2002-12-3 15:18:44 | 显示全部楼层
还是非常感谢,我过一段时间再说吧,不过你说完全安装就太片面了,最主要的部分我都是选完全安装的,难不成让我把哪些办公套件都装上?最起码的开发包我也装了啊,linux真是让人生畏哪,佩服你们这些高手们
发表于 2002-12-4 10:36:44 | 显示全部楼层
其实在安装过程中有个[全部],其实显卡升级需要[开发工具]=》kernel-source,还有一大堆的库文件等。
如果您对系统了解,根本就不必这样安装,如果对系统不是太了解,就按我说的做。

不能说“主要的部份是完全装”,这不是完全安装。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表