LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
楼主: 小神

声卡问题cmidia 8738

[复制链接]
发表于 2003-6-1 14:29:28 | 显示全部楼层
8738内核就支持吧。。。
 楼主| 发表于 2003-6-1 14:40:25 | 显示全部楼层
o !用了rh9.0的oss
就好了
谢谢
 楼主| 发表于 2003-6-1 15:22:03 | 显示全部楼层
混到
安装是测试又声音
其他还是老样子没有声音阿
我发现我也没有
soundon
soundoff
soundconf
明令
发表于 2003-6-2 02:53:04 | 显示全部楼层
如果是xmms没有声音,应该为它打个补丁。

http://havardk.xmms.org/dist/xmm ... 3-1.2.7-21.i386.rpm
发表于 2003-6-2 11:36:37 | 显示全部楼层
老大,我是RH8,cmeida8738声卡,用rh9的oss行不?我使了一下,总是失败,我是一步一步按照哪个贴子走的,编译的工具也都安了.
 楼主| 发表于 2003-6-4 18:18:43 | 显示全部楼层
最初由 zl1 发表
老大,我是RH8,cmeida8738声卡,用rh9的oss行不?我使了一下,总是失败,我是一步一步按照哪个贴子走的,编译的工具也都安了.



我没有配置
自动识别了阿
 楼主| 发表于 2003-6-4 18:21:43 | 显示全部楼层
我终于弄好了
在终端下运行setup
选择配置声卡
然后就自动识别了;
测试通过后就没有问题了
发表于 2003-6-8 21:17:30 | 显示全部楼层
北南兄,麻烦帮我看看这个,我用的是Magic Linux1.1安装了oss397h
soundon出现了错误。 license.asc照osofeware兄那样作了
[root@Yob root]# soundon
Failed to activate the driver
Probably caused by a technical problem.
See /usr/lib/oss/soundon.log for more info.
这个是soundon.log
日  6月  8 20:52:09 CST 2003
OSS build 3.9.7h-0304051449 (Linux-2.4.20-8 )
Kernel version: Linux Yob 2.4.20-1.1 #1 六 4月 19 00:50:27 CST 2003 i686 i686 i386 GNU/Linux
Kernel signature: d2b3b36f9a34f125572865033eab1c57
Modutils version: 2.4.22
  8:52pm  up 2 min,  2 users,  load average: 1.02, 0.45, 0.16
=== Running /usr/local/bin/soundon ===
Install directory: /usr/lib/oss
No precompiled sndshield module available for this kernel

Warning: loading /usr/lib/oss/modules/sndshield will taint the kernel: non-GPL license - LGPL
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module sndshield loaded, with warnings
sndshield loaded OK
Warning: loading /usr/lib/oss/modules/soundbase will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module soundbase loaded, with warnings
soundbase loaded OK
Warning: loading /usr/lib/oss/modules/pnp will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module pnp loaded, with warnings
pnp loaded OK
Warning: loading /usr/lib/oss/modules/uart401 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module uart401 loaded, with warnings
uart401 loaded OK
Warning: loading /usr/lib/oss/modules/opl3 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module opl3 loaded, with warnings
opl3 loaded OK
Warning: loading /usr/lib/oss/modules/cmpci will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module cmpci loaded, with warnings
cmpci loaded OK

********************************************************************
* You can safely ignore the above message about tainting the kernel.
* It is completely political and means just that the maintainers of
* of modutils package dislike software that is not distributed under
* an open source license.
********************************************************************

Module loading finished.
==== About to start the driver using the following config ===
# Use soundconf to edit this file.
/SECUREAUDIO OFF
/PCIIRQ 3
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI011113f6 #CMedia CM8738
CMPCI ON
++ pnpres.dat ++
++++
Get version: Read-only file system
Failed to activate the driver
++++ dmesg printout follows ++++
Linux version 2.4.20-1.1 (root@magiclinux) (gcc version 3.2.2 20030313 (Red Hat Linux 3.2.2-10)) #1 六 4月 19 00:50:27 CST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 668.196 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1333.65 BogoMIPS
Memory: 251708k/261056k available (1348k kernel code, 6924k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb0f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hddMA
hda: IC35L120AVV207-0, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdd: LTN485S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=15017/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 373k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 01:32:44 Apr 19 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:1f.2
PCI: Sharing IRQ 3 with 01:0a.0
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
Adding Swap: 409616k swap-space (priority -1)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 01:07.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xd08ab000, 00:d0:09:53:c4:76, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Setting 10mbps full-duplex based on auto-negotiated partner ability 4061.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 E Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xd0000000
memory : ccce2a00
memory : ccce2a80
memory : ccce2b00
ide-floppy driver 0.99.newide
hdd: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
++++
----BEGIN PGP SIGNED MESSAGE-----

Copyright (C) 4Front Technologies. All rights reserved.

!serial=N02753959
!product=OSS_1
!options=ALL
!person=UNION
!organization=
!email=all@union.com
!os=*
!sold_by=4Front
!support=2002
!upgrades=2004
!version=3.
!flags=99b57b52

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3i
Charset: noconv

uN10NunionUNIONuni0NuNi0Nun10nunI0NunionUNi0nuNi0nUni0nUn1onUnio
nUni0nUn10nUnionUnI0Nun1onUN10NunionUn1OnUn1oNUni0nUn1oNuni0Nuni
0nUni0nun1OnUnionUNIONunionUN10nUni0nun10nuNi0nUn1ONuN1onUni0nUn
1onUn10nuNioN=
Un10n
-----END PGP SIGNATURE-----
发表于 2003-6-8 21:21:14 | 显示全部楼层
如果是8738的声卡,是没有必要用OSS的,系统本身就支持
#sndconfig

就能找到了。试一下。
发表于 2003-6-8 21:27:54 | 显示全部楼层
我试过了不行,不知道为什么。
[root@Yob root]# sndconfig

然后就停住不动了,没听到声音。我的是板载的声卡
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表