Yoper 1.2中文环境设置指南

Neo.K

原来自带了Nvidia的驱动啊！

bluesprite

不行啊。显卡设置错了，如何改回来啊？

我的配置：
P4-1.6G 256M 40GB

VIA8233主板集成声卡-->不支持
GF2 MX400 64M--->好像也没支持，
8139 10M/100M NIC
ADSL
1394卡
DIAMOND-DATA CDRW
PHILIPS 15A--->显示器列表中居然没有，只有15B

另外：
1、安装后启动，有如下提示：
FILESYSTEM SEEMS MOUNTED READ-ONLY.
不懂？？？？？？

2、检测我的硬件时，死机。我已经记不清多少回了。
:help :help :help

3Q

jin.liu

After you do as what I have writen,you may change the file /etc/init.d/kdm
#modprobe nvidia->
modprobe nvidia
you also add # to others options!
Enjoy!

jin.liu

In fact Yoper is really very good and it runs fast.
But now I still can't make show chinese file in WindowsXP correctly.
I do as follows,but It dosen't work.
mout -t vfat -o iocharset=cp936 /dev/hda5 /mnt/d

bluesprite

最初由 jin.liu 发表
In fact Yoper is really very good and it runs fast.
But now I still can't make show chinese file in WindowsXP correctly.
I do as follows,but It dosen't work.
mout -t vfat -o iocharset=cp936 /dev/hda5 /mnt/d

可能要重新编译内核。打开光盘中最大的文件，会发现她好像是克隆下来的。根本没有什么软件包。总之，检测我的配置半个小时都过不去。我是回到我的slackware了.

第二张光盘是Knoppix，可能是用于重新编译的。

jin.liu

There are GNOME ,openoffice ,mplayer etc in CD2.there are fewer softwares compared others.But we can add it by ourselve,can't we?