[服务新手] gentoo-sources内核.config文件配置服务

ghosTM55

支持~~~~~~~~~

oiniya

cpu :
AMD Athlon(tm) II X4 630 Processor
芯片 :
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce GTS 250] (rev a2)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)


thanks
忘说 了 ,硬盘有 两 个 ,一个 是 串口 500G,一个 是 老 的 ide接口  80G

zhou3345

Post by gaobbc;2076244
我查了一下，网卡有两个，你所说的是一个有线网卡。我所说的一个无线网卡。声卡是ich8，具体声卡如何查了

1. 04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
   
2. 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
   

复制代码

intel没有3945的有线网卡。
这里显示很明显无线是intel-5100，有线网卡是 realtek-8101e


@oiniya 敬请测试

oiniya

/bin/sh: lzma: command not found
make[2]: *** [arch/x86/boot/compressed/vmlinux.bin.lzma] 错误 1
make[1]: *** [arch/x86/boot/compressed/vmlinux] 错误 2

出现 这个错 误.

oiniya

这个 是 我 的 .config文件,关键就 是硬盘部分 .

oiniya

here is

oiniya

这是 我上 面 的 配置文件的 引导結果,可以看 到 80G的 sdb和 500G的sda了,还 有 一 个 sr0是 什么 ?好象10G大 小 .

我 用root=uuid的话 ,是unknow block(0, 0)错 误
用 root=/dev/sdb6的 话 ,是 unknow block(8, 22)
********************************************************************************
/etc/fstab
UUID=3d0a29aa-0927-4c21-bd83-44cdefb54ab7   /            ext4    errors=remount-ro   0       1
# swap was on /dev/sdb7 during installation
UUID=a952ab69-4814-4a8f-a61f-fc2dd7908036   none         swap    sw                  0       0
#/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
**********************************************************************************
grub.conf
default 0
timeout 30
#splashimage=(hd0,0)/boot/grub/splash.xpm.gz

#title Gentoo Linux 2.6.24-r5
#root (hd0,0)
#kernel /boot/kernel-genkernel-x86-2.6.24-gentoo-r5 root=/dev/ram0 real_root=/dev/sda3
#initrd /boot/initramfs-genkernel-x86-2.6.24-gentoo-r5

# vim:ft=conf:
title Gentoo Linux
# 内核镜像（或者操作系统）所在分区
root (hd0,5)
kernel /boot/gentoo root=UUID=3d0a29aa-0927-4c21-bd83-44cdefb54ab7
#kernel /boot/gentoo root=/dev/sdb6

# 接下来的四行只有在您与Windows系统进行双启动的情况下才需要。
title Windows Se7en
rootnoverify (hd1,0)
makeactive
chainloader +1

oiniya

貼图大 小 限制
http://oiniya.blog.163.com/album/#m=1&aid=146889824&p=1
这里 有

zhllg

lzma -> emerge xz-utils

zhou3345

好像是fstab文件出问题了。

你可以把没有安装gentoo的那块盘先拔掉试试，如果还是不能进，那就一定是 fstab 文件或者 grub.conf 文件出错了。