也是PCTEL猫的问题

北南南北

其实这也是拔号的。就是设置一下DNS，或者用DHCP也行。再试一下。

3331

关于南北兄说的DNS,DHCP我既不知然,也不知所以然,
有没有更简单的办法不能拨号的原因?

北南南北

另外就是KPPP了，只有这两种方法，其实这些都是比较简单，因为我怕KPPP打不开猫，所以就得用network的方法。
好好的研究一下。明天咱们研究一下它的FAQ吧。我觉得安装成功了，问题应该不是太大。

3331

请南北兄多费心了

32号

我的猫也是HSP56的。确认是i8xx
使用的驱动是pctel-0.9.6.tar.gz
在安装完成后用#redhat-config-network添加modem但系统检测不到。
用#insmod pctel显示：
[root@localhost root]# insmod pctel
Using /lib/modules/2.4.18-14/misc/pctel.o
/lib/modules/2.4.18-14/misc/pctel.o: The module you are trying to load (/lib/modules/2.4.18-14/misc/pctel.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.
[root@localhost root]# insmod ptserial
Using /lib/modules/2.4.18-14/misc/ptserial.o
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol dsp_head
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol COM_Vlcr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol PctelInitCtrlVars
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol Pctel_module_free
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_ier
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_dll
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_dlm
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol GlobalTimer
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol dsp_tail
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_ier
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_scr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol HAL_GetTimer
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_tx
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_dll
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_dlm
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_lcr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_msr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol ccount
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_scr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_lcr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_msr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol audio_buffers
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol HAL_DoInterrupt
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_iir
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol PctelInitVUartVars
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_lsr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_mcr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol modem_main
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol get_uart_rx
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_iir
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol Pctel_module_init
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol HAL_Deinit
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol dsp_buffer
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol audio_on_count
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol dspMain
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol HAL_Init
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_mcr
/lib/modules/2.4.18-14/misc/ptserial.o: unresolved symbol put_uart_lsr
/lib/modules/2.4.18-14/misc/ptserial.o:
Hint: You are trying to load a module without a GPL compatible license
      and it has unresolved symbols.  Contact the module supplier for
      assistance, only they can help you.
最后在/var/log/messages信息里看到：
Nov  9 22:29:08 localhost kernel: Intel 810 + AC97 Audio, version 0.22, 13:45:06 Sep  4 2002
Nov  9 22:29:08 localhost kernel: PCI: Found IRQ 11 for device 00:1f.5
Nov  9 22:29:08 localhost kernel: PCI: Sharing IRQ 11 with 00:1f.6
Nov  9 22:29:08 localhost kernel: PCI: Sharing IRQ 11 with 01:07.1
Nov  9 22:29:08 localhost kernel: PCI: Setting latency timer of device 00:1f.5 to 64
Nov  9 22:29:08 localhost kernel: i810: Intel ICH2 found at IO 0xe100 and 0xe000, IRQ 11
Nov  9 22:29:09 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Nov  9 22:29:09 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Nov  9 22:29:09 localhost kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7600 (SigmaTel STAC????)
Nov  9 22:29:09 localhost kernel: i810_audio: only 48Khz playback available.
Nov  9 22:29:09 localhost kernel: i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
Nov  9 22:29:09 localhost kernel: ac97_codec: AC97 Modem codec, id: 0x5349:0x4c21 (Unknown)
Nov  9 22:29:09 localhost kernel: i810_audio: timed out waiting for codec 1 analog ready.
Nov  9 22:29:10 localhost modprobe: modprobe: Can't locate module sound-service-0-3
Nov  9 22:33:42 localhost modprobe: modprobe: Can't locate module char-major-62
Nov  9 22:35:07 localhost last message repeated 2 times
不知道那里不对，安装很久都不成功。请兄弟帮帮。

北南南北

The module you are trying to load (/lib/modules/2.4.18-14/misc/pctel.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.

看样子是GCC的版本过高。

32号

那到那里找低版本的呀。
找到后，现在这个版本的怎么删除？教教，我是菜鸟啊！

北南南北

http://fr2.rpmfind.net/linux/rpm ... p;submit=Search+...
试一下用gcc2.96，至于如何把gcc的版本降下来，我还没有试过，请兄弟下载一个RPM，安装一下试试看。

32号

安装失败。

北南南北

为什么失败，请兄弟说一下原因，多谢