2.我上次升级KDE后没有登录窗,就是加上这一句搞定的,不知道你有没有安装kdm(默认应该是有的,至少我的SuSE9.1是这样)这是我的inittab文件,希望对你有帮助,不过我的系统是9.1
- #
- # /etc/inittab
- #
- # Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany. All rights reserved.
- #
- # Author: Florian La Roche, 1996
- # Please send feedback to http://www.suse.de/feedback
- #
- # This is the main configuration file of /sbin/init, which
- # is executed by the kernel on startup. It describes what
- # scripts are used for the different run-levels.
- #
- # All scripts for runlevel changes are in /etc/init.d/.
- #
- # This file may be modified by SuSEconfig unless CHECK_INITTAB
- # in /etc/sysconfig/suseconfig is set to "no"
- #
- # The default runlevel is defined here
- id:5:initdefault:
- # First script to be executed, if not booting in emergency (-b) mode
- si::bootwait:/etc/init.d/boot
- # /etc/init.d/rc takes care of runlevel handling
- #
- # runlevel 0 is System halt (Do not use this for initdefault!)
- # runlevel 1 is Single user mode
- # runlevel 2 is Local multiuser without remote network (e.g. NFS)
- # runlevel 3 is Full multiuser with network
- # runlevel 4 is Not used
- # runlevel 5 is Full multiuser with network and xdm
- # runlevel 6 is System reboot (Do not use this for initdefault!)
- #
- l0:0:wait:/etc/init.d/rc 0
- l1:1:wait:/etc/init.d/rc 1
- l2:2:wait:/etc/init.d/rc 2
- l3:3:wait:/etc/init.d/rc 3
- #l4:4:wait:/etc/init.d/rc 4
- l5:5:wait:/etc/init.d/rc 5
- l6:6:wait:/etc/init.d/rc 6
- # what to do in single-user mode
- ls:S:wait:/etc/init.d/rc S
- ~~:S:respawn:/sbin/sulogin
- # what to do when CTRL-ALT-DEL is pressed
- ca::ctrlaltdel:/sbin/shutdown -r -t 4 now
- # special keyboard request (Alt-UpArrow)
- # look into the kbd-0.90 docs for this
- kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let this work."
- # what to do when power fails/returns
- pf::powerwait:/etc/init.d/powerfail start
- pn::powerfailnow:/etc/init.d/powerfail now
- #pn::powerfail:/etc/init.d/powerfail now
- po::powerokwait:/etc/init.d/powerfail stop
- # for ARGO UPS
- sh:12345:powerfail:/sbin/shutdown -h now THE POWER IS FAILING
- # getty-programs for the normal runlevels
- # <id>:<runlevels>:<action>:<process>
- # The "id" field MUST be the same as the last
- # characters of the device (after "tty").
- 1:2345:respawn:/sbin/mingetty --noclear tty1
- 2:2345:respawn:/sbin/mingetty tty2
- 3:2345:respawn:/sbin/mingetty tty3
- 4:2345:respawn:/sbin/mingetty tty4
- 5:2345:respawn:/sbin/mingetty tty5
- 6:2345:respawn:/sbin/mingetty tty6
- #
- #S0:12345:respawn:/sbin/agetty -L 9600 ttyS0 vt102
- #
- # Note: Do not use tty7 in runlevel 3, this virtual line
- # is occupied by the programm xdm.
- #
- # This is for the package xdmsc, after installing and
- # and configuration you should remove the comment character
- # from the following line:
- #7:3:respawn:+/etc/init.d/rx tty7
- # modem getty.
- # mo:235:respawn:/usr/sbin/mgetty -s 38400 modem
- # fax getty (hylafax)
- # mo:35:respawn:/usr/lib/fax/faxgetty /dev/modem
- # vbox (voice box) getty
- # I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6
- # I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7
- x:5:respawn:/opt/kde/bin/kdm -nodaemon
- # end of /etc/inittab
-
复制代码
4.如果你已经在YaST里把DNS、网关、IP(你应该设好了,否则不可能上得了网),还有代理都设置好了,还是上不了更新服务器的话,可能是教育网的问题了,不过我也是教育网,没问题只是速度有点受不了 |