驱动命令执行出错

zylink

cmi 8338的
在redhat8.0中可以检测出来,但是都是杂音,
怎么解决?

我找到驱动,按说明执行
C-Media CMI8338

======================================================================



  1. Backup the Config.in and Makefile in the sound driver directory

     (/usr/src/linux/driver/sound).

     The Configure.help provide help when you config driver in step

     4, please backup the original one (/usr/src/linux/Document) and

     copy this file.

     The cmpci is document for the driver in detail, please copy it

     to /usr/src/linux/Document/sound so you can refer it. Backup if

     there is already one.



  2. Extract the tar file by 'tar xvzf cmpci-xx.tar.gz' in the above

     directory.



  3. Change directory to /usr/src/linux



  4. Config cm8338 driver by 'make menuconfig', 'make config' or

     'make xconfig' command.



  5. Please select Sound Card (CONFIG_SOUND=m) support and CMPCI

     driver (CONFIG_SOUND_CMPCI=m) as modules. Resident mode not tested.

     For driver option, please refer 'DRIVER PARAMETER'



  6. Compile the kernel if necessary.



  7. Compile the modules by 'make modules'.



  8. Install the modules by 'make modules_install'





INSTALL DRIVER

================================================================================



  1. Before first time to run the driver, create module dependency by

     'depmod -a'



  2. To install the driver manually, enter 'modprobe cmpci'.



  3. Driver installation for various distributions:



    a. Slackware 4.0

       Add the 'modprobe cmpci' command in your /etc/rc.d/rc.modules

       file.so you can start the driver automatically each time booting.



    b. Caldera OpenLinux 2.2

       Use LISA to load the cmpci module.



    c. RedHat 6.0 and S.u.S.E. 6.1

       Add following command in /etc/conf.modules:



       alias sound cmpci



        also visit http://www.cmedia.com.tw for installation instruction.



DRIVER PARAMETER

===========
我执行到第4步时候,出了很多英文问题让我选,
很多我都掠过,第5步不知道是什么意思,

北南南北

5. Please select Sound Card (CONFIG_SOUND=m) support and CMPCI

driver (CONFIG_SOUND_CMPCI=m) as modules. Resident mode not tested.

For driver option, please refer 'DRIVER PARAMETER'


这步是编内核，把声卡编成模块来支持。

如果是现在声卡已经有声音了，其实就是系统已经支持了。也是模块支持。这个方法看来是比较老了。因为在新版本中已经把这个做好了。

用OSS或ALSA试一下吧。看一下置顶的帖子。