[求助]为什么刷新率的问题就是解决不了了呢。。。多谢了

linuxx

是不是只在xorg.conf里修改就可以啊？
我在里面加了行
Modeline "800x600@75" 49.85 800 832 1016 1048 600 611 619 631
把水平，竖直刷新率都改了，但是刷新率仍为60。。。

这是改后的xorg.conf 文件：

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "rotocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Driver "i810"
BusID "CI:0:1:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
#HorizSync 28-64
#VertRefresh 43-60
HorizSync 29-70
VertRefresh 47-120
Modeline "800x600@75" 49.85 800 832 1016 1048 600 611 619 631
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
Monitor "Generic Monitor"
DefaultDepth 24
Modeline "800x600@75" 49.85 800 832 1016 1048 600 611 619 631
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600@75" "720x400" "640x480" "640x400"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

好几天了都搞不定。。。Sad
多谢了！

charliechan

#dpkg-reconfigure xserver-xorg

linuxx

Post by charliechan
#dpkg-reconfigure xserver-xorg

修改完后，执行过了。。。不行啊。。。

leo_tzao

是不是液晶显示器？

wygang

我的是要是要1024×768@85的话就把
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
EndSection
前面的 1280×1024全删了,变成
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 4
Modes  "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 8
Modes  "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 15
Modes  "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480" "640x400"
EndSubSection
EndSection
你可以试一试把前面的删掉,记得要备份哦!

linuxx

终于成功了！  但不知为什么。。。
今天开始时xwindow都没进去，
用vi把xorg。conf中
－把没用的分辨率都去掉了，
－把Modeline "800x600@75" 49.85 800 832 1016 1048 600 611 619 631
这行也注释掉了，重启之后就可以了，
而且在 首选项－》屏幕分辨率中 可以识别到85Hz的刷新率？！且显示正常！
这样一折腾我也不知为什么就成功了呢:?: :?: :