ARM芯片LINUX内核编译问题

eagleye

s3c2410芯片,cross2.95.3g c c 交叉编译器(开发板自带),内核用开发板自带的.编译时执行如下步骤:make menuconfig&&make dep&&make zImage...就在执行最后一步时出现问题:
/usr/local/arm/2.95.3/bin/arm-linux-gcc -D__KERNEL__ -I/usr/local/arm/s3c2410_kernel2.4.18_r1.1/include -Wall -Wstrict-prototypes -Wno-trigraphs -Os -mapcs -fno-strict-aliasing -fno-common -fno-common -pipe -mapcs-32 -march=armv4  -mshort-load-bytes -msoft-float   -DKBUILD_BASENAME=main -c -o init/main.o init/main.c
init/main.c:14: asm/arch/S3C2410.h: ?????????
init/main.c:15: asm/arcc/cpu_s3c2410.h: ?????????
init/main.c: In function `reset_clocking':
init/main.c:279: `MPLLCON' undeclared (first use in this function)
init/main.c:279: (Each undeclared identifier is reported only once
init/main.c:279: for each function it appears in.)
init/main.c:280: `UBRDIV0' undeclared (first use in this function)
init/main.c:280: warning: implicit declaration of function `s3c2410_get_bus_clk'
init/main.c:280: `GET_PCLK' undeclared (first use in this function)
make: *** [init/main.o] 错误 1
哪位大侠帮我一下???

qld001a

s3c2410的驱动有问题，不过如果你是买的成套的开发套件，应该可以很容易从产品的公司重新获得相关代码和帮助，另外也可能在make menuconfig之后在进行内核配置上有些选项造成冲突，你先试一下使用默认的选项，或者把大多数的功能都去掉，作最小化之后看看能否编译通过。