求助：我的ubuntu 6.04启动起来没有虚拟控制台了

aiyi

启动起来Alt-F1到Alt-F6的几个虚拟控制台没有了，
还好gdm是自启动的，要不就麻烦更大了。
请问这是怎么回事啊？

uname 输出如下：
[PHP]
aiyi@ubuntu:~$ uname -a
Linux ubuntu 2.6.15-19-386 #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 i686 GNU/Linux
[/PHP]

我的inittab文件：
[PHP]
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $

# The default runlevel.
id:2:initdefault:

# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS

# What to do in single-user mode.
~~:S:wait:/sbin/sulogin

# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.

l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin

# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."

# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop

# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
#  <id>:<runlevels>:<action>:<process>
#
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6

# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100

# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
[/PHP]

我的/etc/rc2.d下的链接：
[PHP]
aiyi@ubuntu:/etc/rc2.d$ ls
K08vmware    S19bind9          S20traffic-vis     S90vmware
K11anacron   S19mysql-ndb-mgm  S20vsftpd          S98usplash
S05vbesave   S20bandwidthd     S21mysql-ndb       S99rc.local
S10acpid     S20makedev        S25mdadm           S99rmnologin
S10sysklogd  S20postfix        S89anacron         S99stop-bootchart
S11klogd     S20pptpd          S89atd             S99stop-readahead
S12dbus      S20samba          S89cron
S13gdm       S20ssh            S90binfmt-support
[/PHP]

seamonkey

估计你没装usplash，而又加了vga=xxx，vesafb没有自动载入，所以控制台其实在那里，但没有显示驱动，你手动载入vesafb试试看。

aiyi

搞定了，谢谢哈

seamonkey

不对，你好像装了usplash
S98usplash

怎么搞定的？问题出在哪里？

aiyi

我想起来很早以前用hiweed时我遇到过console没有反应的现象，
后来把getty换成mgetty就好了，
我试了试这个就好了

不过现在我已经换了flight6了

myfavourite

楼主，我也出现你上面的情况。
然后按你的方法把

把getty换成mgetty就好了

，并没有解决问题

我就是把下面的修改的：

# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/mgetty 38400 tty1
2:23:respawn:/sbin/mgetty 38400 tty2
3:23:respawn:/sbin/mgetty 38400 tty3
4:23:respawn:/sbin/mgetty 38400 tty4
5:23:respawn:/sbin/mgetty 38400 tty5
6:23:respawn:/sbin/mgetty 38400 tty6

myfavourite

我用aptitude upgrade
把软件升级到最新版本就可以登录。：）