教OPENSUSE新手手动安装nvidia显卡驱动

hbbb404384172

1.首先确保kernel-source、make、gcc已安装，没有就在YaST搜索安装。
2.安装好后以root身份在终端输入：cd /usr/src/linux
make cloneconfig
make prepare
3.在N卡官方网站下载相应的驱动http://www.nvidia.cn/object/unix_cn.html
4.以root身份登入终端再输入：init 3
5.cd /home/您的帐号/你的N卡驱动所在目录
6.在终端输入：sh  NVIDIA-Linux-<arch>-<version>-<build>-<pkg#>.run -q
例如 sh NVIDIA-Linux-x86-173.14.12-pkg1.run -q
7.设定X.org
终端输入：sax2 -r -m 0=nvidia  /*注意，0为数字，不是字母*/
8.再输：init 5

tianxinwei

占位学习
一直搞不定驱动，看有没有帮助了，感谢哦

konsole

请教一下:
2.安装好后在终端输入：cd /usr/src/linux
make cloneconfig
make prepare
这两个make语句的作用什么.
新版11.1系统,MS对N卡的支持(驱动安装)有点问题,我还没装,但有兄弟已发贴提及

wangping

查到如下信息：
---
Because a lot of articles, howtos, readmes and other sorts of text get it wrong, here's the stance:

It is often said to run

cd /usr/src/linux
make cloneconfig
make prepare

or something similar (like mrproper, oldconfig, prepare-all, etc.). This is not required for SUSE Linux (and perhaps other distros). When the binary kernel package and kernel-source is installed, the parts that would have to be configured are already present. A simple call to make (see below) is sufficient. Every external module package (that is sane) will do everything right automatically.

In fact, running `make cloneconfig` or any build operation inside /usr/src/linux will make it unclean so that (sane!) external modules' build process will abort with:

/usr/src/linux is not clean, please run 'make mrproper'
in the '/usr/src/linux' directory.

All of this is correct, since /usr/src/linux is ONLY a source directory, NOT the build directory. A few external module packages are, however, so broken that they fail to make this distinction and run into one of two problems: (1) they cannot find some header file, (2) says you have yet to configure your kernel (which is wrong of course).
-----

貌似是不需要
make cloneconfig
make prepare

d4rkl0rd

为什么要这样安装呢？官方不是提供了nvdida的一键安装吗？
刚才看了下目前只有for 11.0的

blackbat8

我再试试把。
我的显卡是geforce6100的集成显卡。原来我在f9，f10.opensuse11.0里都试了装n卡的官方驱动，到sax2 -r -m 0=nvidia就不行了。但是在f8，opensuse10.3里装NVIDIA-Linux-x86-171.06.01-pkg1.run这个老驱动正常。只要比这个驱动新的，就到sax2 -r -m 0=nvidia就不行。NVIDIA-Linux-x86-171.06.01-pkg1.run这个老驱动又不支持新版本的linux

hbbb404384172

Post by wangping;1926338
查到如下信息：
---
Because a lot of articles, howtos, readmes and other sorts of text get it wrong, here's the stance:

It is often said to run

cd /usr/src/linux
make cloneconfig
make prepare

or something similar (like mrproper, oldconfig, prepare-all, etc.). This is not required for SUSE Linux (and perhaps other distros). When the binary kernel package and kernel-source is installed, the parts that would have to be configured are already present. A simple call to make (see below) is sufficient. Every external module package (that is sane) will do everything right automatically.

In fact, running `make cloneconfig` or any build operation inside /usr/src/linux will make it unclean so that (sane!) external modules' build process will abort with:

/usr/src/linux is not clean, please run 'make mrproper'
in the '/usr/src/linux' directory.

All of this is correct, since /usr/src/linux is ONLY a source directory, NOT the build directory. A few external module packages are, however, so broken that they fail to make this distinction and run into one of two problems: (1) they cannot find some header file, (2) says you have yet to configure your kernel (which is wrong of course).
-----

貌似是不需要
make cloneconfig
make prepare

如果少了这两句的话，在sh的时候就会提示ERROR，这两句应该是准备核心什么的，以前记得在哪里看过

xscape

Post by d4rkl0rd;1926367
为什么要这样安装呢？官方不是提供了nvdida的一键安装吗？
刚才看了下目前只有for 11.0的

ftp://download.nvidia.com/opensuse/   这里有11.1的源。

hbbb404384172

Post by d4rkl0rd;1926367
为什么要这样安装呢？官方不是提供了nvdida的一键安装吗？
刚才看了下目前只有for 11.0的

不是每个人都有网的

Ken1989

中文wiki上NVIDIA的适用于11.1的一键安装已经添加
另外此页上也有详细的驱动安装说明（中文版）：
http://cn.opensuse.org/NVIDIA