|
发表于 2011-12-13 15:56:44
|
显示全部楼层
Post by palytoxin;2156577
请问你用的是什么拨号的,nm并不能从无线pppoe拨号啊,还是说nm编译的时候需要什么参数?
cli拨号之后,应该是获取到ip了,可奇怪的是浏览器还连不上网。。。(用的rp-pppoe,这个拨号,端口指定wlan0
- ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492 metric 1
- inet 171.116.***.*** netmask 255.255.255.255 destination 171.116.***.***
- ppp txqueuelen 3 (Point-to-Point Protocol)
- RX packets 3 bytes 30 (30.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 3 bytes 30 (30.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- ppp1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492 metric 1
- inet 171.116.***.*** netmask 255.255.255.255 destination 171.116.***.1
- ppp txqueuelen 3 (Point-to-Point Protocol)
- RX packets 3 bytes 30 (30.0 B)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 3 bytes 30 (30.0 B)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
- inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255
- inet6 fe80::222:faff:fe04:7dbc prefixlen 64 scopeid 0x20<link>
- ether 00:22:fa:04:7d:bc txqueuelen 1000 (Ethernet)
- RX packets 976 bytes 194935 (190.3 KiB)
- RX errors 0 dropped 128 overruns 0 frame 0
- TX packets 511 bytes 47706 (46.5 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
复制代码
route add default ppp0 |
|